Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-008 Rev. 5.3 Section 8: Multiple Sites 8-7
3.0 Enter Site Configuration Information
The Sites tab allows an operator to configure the communication parameters and provide identification
information for the individual sites.
The following operations are performed in this section.
• assign a site name
• enter a site address
• enter a site PIN
• enter a site’s modem phone number or TCP/IP address
• enter a modem’s initialization string or remote port number
• enter a global secure time
• enable the global unlock feature for a site
• enter a comment regarding a site
To enter the Sites tab:
1. Click on the Setup ⇒ System pull-down menu or click on the button on the tool bar. The
following window will appear, including the new tab: Sites.
2. Click on the Sites tab. The Sites window appears (see Figure 8-7 on page 6 of this section).
3.1 Assign a Site Name
The site name field allows an operator to assign a descriptive, identifying name to a site in the access
control network. When monitoring system activity, or generating and reviewing event reports, it can be
easier to follow a string of events if the site associated with the events has a descriptive name.
1. Click on the “Site Name” cell for the site to be named.
2. Type a descriptive name for the site. For example, the new site is for a parts warehouse; type
Warehouse (see Figure 8-8 on page 9 of this section).
3.2 Enter the Site Address
The site address field allows an operator to store the address of a site in the access control network.
1. Click on the “Site Address” cell for the site.
2. Type in the address for the site. For example, the parts warehouse is located on 987 Oak Avenue;
type 987 Oak Avenue (see Figure 8-8 on page 9 of this section).
3.3 Site Number
The site number is assigned by the Doors program. It helps the program track database information by
site. It is not editable by the operator.