Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-002 Rev. 5.5 Section 2: Setup System 2-19
1.2.8 Disable Door Type
1. To disable elevator, gate, or time and attendance terminal control, click in the corresponding check
box. The check mark that was there disappears and one of the following windows appear,
depending on which box was checked (see Figure 2-19, Figure 2-20, and Figure 2-21).
Figure 2-19: Elevator Option Changed Warning - OFF
Figure 2-20: Gate Option Changed Warning - OFF
Figure 2-21: Time and Attendance Terminal Option Changed Warning - OFF
2. Click the button. A “Saved Configuration” window flashes on the screen. You must
complete the process to disable each door type individually.
3. Once the Door Type field appears as needed, click on the button to save these changes. If
the Door Type is not saved before clicking any other button or exiting the System Options window,
the data entered is lost and must be re-entered.
1.2.9 Set User Data Export/Import
For detailed information, please refer to “User Data File Export/Import” on page 1 in section 11.
User Data File Export/Import is a separate feature of the Doors access control software. User Data File
Export/Import is not fully active until a License Code is obtained from the Keri Systems’ Customer
Support department. To support the software used, a fee is charged for this License Code. Before
installation, please refer to the requirements found in the User Data File Export/Import Application
Note (P/N 01805-001) to ensure you are properly qualified to use the User Data File Export/Import
feature.