Programming Instructions Manual

ManualsBrandsAlarm Lock ManualsSecurity SystemAlarm Lock TRILOGY DL2700

CONGRATULATIONS!

Your new Alarm Lock Trilogy electronic digital lock is a rugged entry lock

of advanced design with several programmable features. Three security

levels are provided: Master (can perform ALL functions), Manager (can

perform MOST functions plus entry), and Basic User (entry only).

The lock includes 100 User Codes (consisting of Managers and Basic

Users), plus three "one-time entry" Service Codes. The Manager/Basic

User Codes are organized similar to a grid--ten banks of ten Access

Codes.

Take the time to read through this guide to familiarize

yourself with the features and operations of the lock,

and its quick and easy programming procedures.

Features

•

1 Master Code (all functions including entry)

•

10 Manager Codes (perform SOME programming

functions plus entry)

•

90 Basic User Access Codes (Entry Only)

•

3 Service Codes ("One-Time Entry" Codes)

•

Two User Disable Modes:

•

All User Codes Disabled Except Master Code

•

All User Codes in a Bank Disabled Except

Manager Codes

•

30-Second Keypad Anti-Tamper Lockout:

(Keypad Lockout After 3 Unsuccessful User Code

Entries)

•

Programmable Relay Functions:

(Relay may be keypad programmed to energize

on any keypress 0-9 or on unlock).

Trilogy

DL2700 Programming

Instructions

OI209A 2/04

345 Bayview Avenue

Amityville, New York 11701

For Sales and Repairs 1-800-ALA-LOCK

For Technical Service 1-800-645-9440

QUICK LOOKUP

Wiring ................................................................ 2

Quick Start ....................................................... 2

Testing Codes ................................................... 3

Manager & User Location Worksheet ............... 4

Manager & User Location Example .................. 5

Programming Worksheet: Functions ................. 6

Change Existing Master Code ...................... 7

Add/Change Manager Codes ....................... 7

Add/Change User Codes .............................. 7

Deleting Codes ............................................. 7

Disable/Enable Users ................................... 7

Disable/Enable All ........................................ 8

Code Location Function ................................ 8

Next Free Code Address Locator ................. 8

Add/Delete Service Codes .......................... 9

Enable/Disable Passage Mode .................... 9

Pass Time ("Door Unlock") ........................... 9

Disable/Enable Groups ................................. 9

Disable/Enable Users in Bank .................... 10

Keypress Sound Options ............................ 10

AUX Relay Functions ................................. 10

Lock Identifier ............................................. 10

Audible and LED Indications ........................... 11

Battery Replacement ....................................... 11

Erase All Programming ................................... 11

Limited Warranty ............................................. 12

DL2700

Summary of content (12 pages)

PAGE 1
Trilogy 345 Bayview Avenue Amityville, New York 11701 For Sales and Repairs 1-800-ALA-LOCK For Technical Service 1-800-645-9440 DL2700 Programming Instructions OI209A 2/04 © ALARM LOCK 2004 CONGRATULATIONS! Your new Alarm Lock Trilogy electronic digital lock is a rugged entry lock of advanced design with several programmable features. Three security levels are provided: Master (can perform ALL functions), Manager (can perform MOST functions plus entry), and Basic User (entry only).
PAGE 2
Wiring See the Installation Instructions for more information. Batteries: Use only 1.5 volt Duracell Alkaline size-AA batteries. External Power: An external 7.5 VDC Power Source, capable of at least 100mA, must be used for operation without batteries in the lock. Use an external UL-Listed power supply provided with backup battery power and current limiting protection that is approved for the application. BLACK = Negative, RED = Positive. Aux Relay: Aux Relay allows up to 300mA @ 60VDC Maximum.
PAGE 3
Quick Start (cont’d) Enter a Manager Code Manager Codes are located at locations 00, 10, 20, 30, 40, 50, 60, 70, 80, and 90 (see grid on page 4). Note: New Manager Codes MUST use the same number of digits as the (new) Master Code. Enter as follows. 1. Press the (new) Master Code. 2. Press ; [press a Manager location i.e. 00, 10, 20, 30, 40, 50, 60, 70, 80, or 90] ;. 3. Press a new Manager Code using the same number of digits as the (new) Master Code. A 6-beep acknowledgement (with a red LED) will sound.
PAGE 4
Manager & User Location Worksheet The DL2700 lock provides three "security levels": Master (can perform ALL functions), Manager (can perform SOME programming functions plus entry), and Basic User (entry only). In total, there are 104 "locations" inside the DL2700 lock: one Master Code, 10 Manager and 90 User Access Codes, and three "one-time entry" Service Codes. Where the Access Code is located will determine its security level.
PAGE 5
Manager & User Location Example User Access Codes allow access only; Manager Codes allow more: Manager Codes have the ability to program and delete User Access Codes within that Manager's Bank (column). The DL2700 lock can hold up to 10 Manager Codes, one for each Bank (locations (00), (10), (20), (30), (40), (50), (60), (70), (80), (90)), and are all found at the top row of the grid below. Note: Only the Master Code can add or delete a Manager Code.
PAGE 6
Programming Worksheet: Functions Directions: The Factory Master Code (1-2-3-4-5) must first be reprogrammed as a new Master Code before any other programming can take place. All new Access Codes must have the same number of digits as the new Master Code. Choose new Access Codes and write them in spaces provided (in pencil) before programming the lock. 6 beeps will usually be heard after an acceptable entry.
PAGE 7
Programming Functions Change Existing Master Code* ; 1 ; For new locks, follow the "Quick Start" on page 2. [ __ __ __ __ __ ] ;1; [ __ __ __ __ __ ] ; [ __ __ __ __ __ ] Old (or "Factory") Master Code New Master Code* Confirm New Master Code* Add/Change Manager Codes ; [ __ ] 0 ; Follow the "Quick Start" on page 3. Note: You can also add/change the Manager Code in location 00 by entering the Master Code, ; 2 ; then the new Manager Code.
PAGE 8
Programming Functions (cont'd) Enable/Disable All Disable All: If Master Code is used, disables all 100 User\Manager Codes and clears all 3 Service Codes. If a Manager Code is used, disables all Users (even across multiple Banks) under that Manager. Disable Users Only: If Master Code is used, disables all 90 Users and clears all 3 Service Codes, while Managers remain active. If a Manager Code is used, disables all Users (even across multiple banks) under that Manager.
PAGE 9
Programming Functions (cont'd) Add/Delete Service Codes Service Codes are one-time-only Codes; once entered into the keypad, it is deleted. Use the same Code up to 3 times by programming all three Service Codes with the same Code. Note: Service Codes are lost if power is removed. To delete a single Service Code, press ;, enter Service Code number (301, 302 or 303), then press ; :.
PAGE 10
Programming Functions (cont'd) Disable/Enable Users in Bank Enter Bank number (0-9) to Enable/Disable all Users in Bank. Entering a disabled Code will result in an accented five beep error tone (indicating the User Access Code is valid but disabled).
PAGE 11
Audible and LED Indications When a key is pressed, a beep will sound and a Red LED will flash. Other indications are: ▪ Access Granted: 1 beep and a Green LED flash. (When Pass Time ends, the DL2700 locks with a beep and a Red LED flash). ▪ Invalid Code Entered: 5 beeps and 5 Red LED flashes. ▪ Disabled Code Entered: 5 beeps (with extended first beep) and 5 Red LED flashes. ▪ New Access Code Accepted: 6 beeps and 6 Red LED flashes. ▪ Programming Error: 2 sets of 5 beeps and 5 Red LED flashes.
PAGE 12
Alarm Lock Limited Warranty ALARM LOCK SYSTEMS, INC. (ALARM LOCK) warrants its products to be free from manufacturing defects in materials and workmanship for 24 months following the date of manufacture. ALARM LOCK will, within said period, at its option, repair or replace any product failing to operate correctly without charge to the original purchaser or user.