Programming instructions

23
; 5 5 :
; 5 7 :
57. Print Clock Settings, Software
Version and Door Number
55. Print Audit Trail
; 5 6 :
56. Print User Code List
; 5 8 :
58. Upload/Download PC Data
Hold the printer over the lock's infrared sensor as shown in Figure 1 and Figure 2 above.
Twenty (20) events will print at a time; press 1 for more events, or 9 to quit. To abort
printing, press any key for 3 seconds (three short beeps will sound).
Hold the printer over the lock's infrared sensor as shown in Figure 1 and Figure 2 above.
To abort printing, press any key for 3 seconds (three short beeps will sound).
Hold the printer over the lock's infrared sensor as shown in Figure 1 and Figure 2 above.
For use with DL-WINDOWS software, refer to OI237. AL-PCI interface cable is needed.
1
3
3
PRINTER
DOWNLOADING
Hold the printer perpendicular to the Lock’s infrared LED as shown in Figure 1 and Figure 2. If the
printer has been idle for some time, press the paper feed button to wake up the printer.
1
Programming Functions (cont'd)
Figure 2
Infrared
LED
Infrared
Reader
Place Infrared Reader (on printer) in
front of the Infrared LED (on lock)
Figure 1
PDL3000 to Printer
- Side View
Infrared
LED