Programming instructions

1. New Master Code (User Number 1)

2. Add/Delete/Change User Codes 2-2000

; 1 ; [ _ _ _ _ _ _ ] ; [ _ _ _ _ _ _ ] :

(New Master Code) (Confirm New Master Code)

; 2 ; [ _ _ _ _ ] * ; [ _ _ _ _ _ _ ] :

(User Number) (User Code)

• User Number must be between 2 and 2000.

• To delete a code, leave the User Code blank and wait for the rapid beeping to stop.

• User Code must be 3-6 digits.

• Each User Code can be thought of as a person. As long as each person possesses their own

unique User Code, you can control access to the lock by adding or deleting User Codes. See

"Terminology Used in this Manual" on page 6 for more information.

• Master Code must be 6 digits-only.

• Master Code is Keypad Code Access only.

• Factory Default = 123456

• See "Lock Design Overview" on page 5 for more information about Master Codes.

USERS

Lock Defaults for DL3500, DL3500EX & ETDL

See page 8. Users added will default to a Group Association and a Program Level Ability as follows:

USER TYPE USER NUMBER GROUP DEFAULT MINIMUM PROGRAM

Master 1 -

M (All Programming Abilities)

Installers 2 & 3 none

4 (Also 3, 2, 1)

Managers 4 - 6 none

3 (Also 2, 1)

Supervisors 7 - 9 none

2 (Also 1)

Print Only Users 10 - 11 none

Basic Users 12 - 50 none none

Basic Users in Group 1 51 - 100 1 none

Basic Users in Group 2 101 - 150 2 none

Basic Users in Group 3 151 - 200 3 none

Basic Users in Group 4 201 - 250 4 none

Basic Users 251 - 296 none none

Quick Enable User 300 297 none none

Quick PC Access 298 none none

AL-DTM Code* 299 none none

Service User 300 none none

Basic Users** 301-2000 none none

Programming Functions

* User 299 is a Non-Pass Code. This is the only code that will initiate data transfer with the AL-DTM.

** DL3500 and DL3500EX locks are limited to 300 Users.