Installation guide

28 © 2001 Directed Electronics, Inc. Vista, CA
features menu
feature descriptions
1 ACTIVE/PASSIVE ARMING: When active arming is selected, the system will only arm when the transmitter is
used. When set to passive, the system will arm automatically 30 seconds after the last protected entry is closed.
Passive arming is indicated by the rapid flashing of the LED when the last protected entry point is closed.
2 CONFIRMATION CHIRPS ON/OFF: This feature controls the chirps that confirm the arming and disarming of
the system.
3 IGNITION-CONTROLLED DOOR LOCK/UNLOCK ON/OFF: When turned on, the doors will lock three seconds
after the ignition is turned on and unlock when the ignition is turned off. If the ignition key is turned on while
the vehicle door(s) are open, the door(s) will not lock.
4 ACTIVE/PASSIVE LOCKING: If passive arming is selected in Feature 1, then the system can be programmed
to either lock the doors when passive arming occurs, or only lock the doors when the system is armed with the
transmitter. Active locking means the system will not lock the doors when it passively arms. Passive locking
means that the system will lock the doors when it passively arms.
5 DOOR LOCK PULSE DURATION: Some European vehicles, such as Mercedes-Benz and Audi, require longer lock
and unlock pulses to operate the vacuum pump. Programming the system to provide 3.5 second pulses will
FEATURE DEFAULT LED ON SETTINGS LED OFF SETTINGS
NUMBER (PRESS LOCK ICON TRANSMITTER BUTTON) (PRESS UNLOCK ICON TRANSMITTER BUTTON)
1 Active Arming Passive Arming
2 Confirmation Chirps ON Confirmation Chirps OFF
3 Ignition Controlled Door Lock/Unlock ON Ignition Controlled Door Lock/Unlock OFF
4 Active Locking Passive Locking
5 0.8-second Door Lock Pulse Duration 3.5-second Door Lock Pulse Duration
6 Double Pulse Unlock OFF Double Pulse Unlock ON
7 Stealth Coding
™
Technology ON Stealth Coding
™
Technology OFF
NOTE: Factory defaults are indicated in bold type.