User's Manual

9
Appearance description:
1. The ALA logo is printed in front of the G-Sensor, there is a circular back cover
towards the bottom of the back; press the two notches on both the left and right
sides and rotate to the left to open the back cover and manually exchange the
battery component.
2. The holder can be used with the shoelaces of sneakers; it can be firmly fixed to
the G-Sensor’s position. There is no burden since it is lightweight.
Buttons description:
1. The E button is the confirm selection
button.
2. The A-C buttons are the up and down
selection buttons.
3. The B-D buttons are the left and right
selection buttons.
Icon description:
1. The heart-shaped icon is the CS004’s icon.
2. G is the GS001’s icon.
3. S is the speed sensor’s icon.
4. C is the cadence sensor’s icon.
How to properly wear the integrated three-axis gravity
sensor (GS001)
Using the ALATECH G-SENSOR (GS001) can help the exerciser record their
exercise step numbers, total step numbers, total exercise distance and average
speed etc. during the exercise process.
1. Users must wear sneakers with shoelaces in order to install the G-Sensor for use
during the exercising process.
2. Select the position to wear the GS001 and insert the holder from bottom upwards
into the bottom of the shoelace’s X crossing and through the top.
3. Face the front of the G-Sensor upwards, and insert the bottom into the bottom of
the holder.
4. When the bottom is inserted, buckle the top part down until you hear a click to
confirm the completion of the assembling.
Select wearing
position