Quick Start Guide

Please charge the sensor for the first use and when the battery is low (Green
flashing LED). Please make sure the charging station and charge terminals at
sensor back are clean and dry before charging to prevent any poor connection.
Put the sensor back facing down to align the charge contacts with the charge
terminals; refer to Fig. A.
Lock the sensor on the side close to the USB cable on charging station and
then lock on the other side; refer to Fig. B.
Connect the USB to a wall charger or your computer.
The green indicator will continuously flash when charging. The light will be
constantly ON when the charge is completed.
Take out the sensor from the charging station by sliding up or down; refer to
Fig. C.
OB001 OPTICAL
HEART RATE ARMBAND
Quick Start Guide
FEATURES
IN THE BOX
HOW TO CHARGE
1
2
3
4
5
Dual mode technology
Compatible with sport watch /Cycling computer /fitness equipment and smart
device with Bluetooth 4.0, ANT+; also work with most Bluetooth Smart Fitness
Apps.
Storage function
The built-in memory can independently record and store heart rate data and
SPM(Steps per minutes); no need to bring the smartphone or wear the watch
when exercising. After exercising, the user can synchronize the data to Ala
Connect through Bluetooth to review the training overview.
Lightweight and comfortable
The sensor and armband are less than 20 grams; can be worn on the forearm or
upper arm.
1
2
3
Sensor
Armband
USB charging station
4
5
Quick guide
Warranty card
3
2
1
LED indicators
Button
Charge terminals
Lock on
Lock on first
Charging
contacts
Charging
terminals
LED
Indicators
ABC
Scan QR Code or search for Ala Connect on
Apple Store or Google Play and download.
Long press the sensor to activate (long
press until the red indicator is ON).
Open Ala Connect and add device
according the instructions. User’s age will
be written into the sensor automatically
after the device is successfully added.
Wear the sensor and go out for exercise.
After the exercise, open Bluetooth and Ala
Connect on your mobile device to
synchronize your training data wirelessly.
The uploaded training data will be stored in
the cloud. Log in cloud.alatech.com.tw to
check your activity report and results.
APP USE AND SENSOR PAIRING
1
2
3
4
5
6
System requirements of APP
installation:
• Support iOS 9 or above
• Support Android 4.4 or above
• Built-in Bluetooth
TM
4.0 or above
* Also compatible with other apps,
such as Strava and Wahoo fitness.
Velcro
Fuzzy side facing the outside
To ensure accurate cadence
detection, wear the sensor on
the inside of the forearm.
Slide both ends of the armband through the
buckles at both ends of the sensor.
Wear the sensor on the inside of forearm or
upper arm. Please do not wear on the wrist
and avoid any tattoo and hair.
Adjust the tightness to make sure the sensor
fits the arm.
HOW TO WEAR
1
2
3