Instructions / Assembly

4/12/17 1 of 3 Wood Stool with Metal Base

Stool W/ Metal Base

Thank you for purchasing our Stool. We have found it helpful to have a second person present

during the assembly of this product.

Assembly Instructions

Lay out all parts on a "non-abrasive"surface to avoid scratching furniture.

M6*45mm

BOLT

QTY.DRAWING DESCRIPTIONNO.

M6*60mm

BOLT

PAGE 1
Stool W/ Metal Base Thank you for purchasing our Stool. We have found it helpful to have a second person present during the assembly of this product. Assembly Instructions Lay out all parts on a "non-abrasive"surface to avoid scratching furniture. NO. D DESCRIPTION QTY.
PAGE 2
Step 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product. Step 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non abrasive surface (like the carton or carpet) to prevent damage to the finish. Step 3 Lay Top Seat (A) upside down and attach Side Assembly (B) to underside of Seat using 4 - M6 x 45mm Bolts (D), 4 washers (F) and 4 Lock Wahsers (E).
PAGE 3
Step 5 Attach Side Assembly (B) to underside of Seat using 4 - M6 x 45mm Bolts (D), 4 washers (F) and 4 Lock Wahsers (E) - Do not over tighten. Attach 2 Cross Rails ( C) using 4 - M6 x 60MM Bolts (G). Align the Bolts thru the holes in Side Assembly (B) into the Threaded Inserts in Cross Rail ( C). TIGHTEN ALL BOLTS FIRMLY AT THIS TIME. C E F CARE Clean with mild soap and wipe dry. REPLACEMENT PARTS: For best service, to order replacement parts go to www.alaterrefurniture.com.