Technical data

Rev. 4/9/2010 Manual #001449 26
High Speed Doors
Operation
TRAVELLING WINDBAR ASSEMBLY – WINDBAR TRACK
(Jamb-Mount)
STEP 2 – ALL JAMB-MOUNTED WINDBARS
Fasten one (1) windbar track bracket to each hole provided in the two (2) windbar tracks. Ori-
ent the windbar track bracket with the slot protruding beyond the track edge opposite the curve.
Fasten the bracket to the track using one (1) 3/8 – 16 NC x 5/8” long BHCS per bracket.
With the door in the open position, disconnect the power supply.
There is a left-hand and right-hand windbar track. Determine the appropriate location for each
track given, that the curved side is furthest from the curtain and the stop bolt holes are at the
bottom.
Determine the curtain to windbar track spacing required for your traveling windbar diameter
(4”, 4-1/2”, 6-5/8” or 8-5/8” O.D.).
Position the windbar track to the jamb accordingly and weld mounting bracket to the jamb or
fasten thru the slot provided.