Technical data

7 Manual #001449 Version 4.2
Service & Repair
Customer Service
In case of door maintenance/malfunctions or repair work, please contact the supplier or the manu-
facturer.
Address of Customer Services Department
1080 Maritime Drive, Port Washington, WI 53074
Phone: [phone] Fax: [phone]
Technical Support: 262-268-9885
[e-mail]
www.albanydoors.com / [e-mail]
Inspection and maintenance
Before starting work on the door, the power must be disconnected by switching off the main power
disconnect and then locked out. Then the control box needs to be checked to verify that voltage
has been eliminated from the panel. Please observe that all used ladders, scaffoldings, or such,
correspond with the valid safety regulations.
The working area must be blocked for both vehicle and foot traffic. Lubrication oil on the floor, tools
and other material should be removed from the floor when work has been finished.
The necessary maintenance inspections, check-up and time intervals are listed in the
Inspection section.
Cleaning and maintenance of the door curtain
Do not ever use any petroleum-based products on the curtain.
Clean curtain with a citrus based cleaner or a cleaner specifically designed for cleaning SBR /
EPDM rubber materials. All cleaners are to be petroleum free and non-caustic.
Dust may be removed with a cloth. Harder dirt may be removed with water. Dirt, grease, or oil
on metal may be removed with a citrus cleaner.