User`s manual

34
Swap Floppy Drive
This item allows you swap the logical drive name assignments.
The Choices: Disabled (default), Enabled.
Boot Up NumLock Status
Selects the NumLock state after power on.
The Choices:
On (default) Numpad is number keys.
Off Numpad is arrow keys.
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
The Choices:
Normal (default) A pin in the keyboard controller
controls Gate A20.
Fast Lets chipset control Gate A20.
Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate
determined by the keyboard controller. When enabled, the
typematic rate and typematic delay can be configured.
The Choices:
Disabled (default)
Enabled
Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold
the key down.
The Choices: 6 (default), 8,10,12,15,20,24,30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins
to repeat the keystroke.