Safety data sheet

37487
Date of issue: 02.07.2014
Albedo100/Invisible Bright, Albedo100/Sparkling Grey,
Protective measures in fire
Wear self-contained breathing apparatus (SCBA) to prevent contact with thermal
decomposition products.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Personal protection
Wear appropriate personal protective equipment - see Section 8. Ensure adequate
ventilation. Avoid heat. Avoid sources of ignation.
6.2. Environmental precautions
Environmental protection
Dyke to prevent entering any sewer or waterway.
6.3. Methods and material for containment and cleaning up
Spill cleanup methods
Spills wiped up with a rag or paper. Absorb in vermiculite, dry sand or earth and place into
containers. Collect and reclaim or dispose in sealed containers in licensed waste.
6.4. Reference to other sections
See section 13 for waste handling.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Usage precautions
Wear appropriate personal protective equipment - see Section 8. Do not spray on hot
surfaces or open flame. Pressurised container: protect from sunlight and do not expose to
temperatures exceeding 50 °C. Do not pierce or burn, even after use. Avoid spilling, skin and
eye contact. Avoid inhalation of vapours/aerosoles. Provide good ventilation.
7.2. Conditions for safe storage, including any incompatibilities
Storage precautions
Keep in cool, dry, ventilated storage and closed containers. Pressurised container: protect
from sunlight and do not expose to temperatures exceeding 50 °C. Do not pierce or burn,
even after use.
7.3. Specific end use(s)
Specific use(s)
Contact supplier for more information.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Ingredient name
CAS no.
Reference
LT Exp 8 Hrs
ST Exp 15 Min
Date
butane
106-97-8
WEL.
600/1450
ppm/mg/m³
750/1810
ppm/mg/m3
heptane [and isomers]
142-82-5
WEL.
500 ppm
dimethyl ether
115-10-6
WEL.
400/766
ppm/mg/m³
500/958
ppm/mg/m3
xylen (o-, m-, p-isomer)
1130-20-7
WEL.
50/220
ppm/mg/m³
100/441
ppm/mg/m3
Ingredient comments
WEL = Workplace exposure limits. SK= Skin absorbance, Rep= Reproduction, Carc=
Carcinogenic Senz= Sensitisers, Mut= Carcinogenic
Process conditions
Provide eyewash station.
Ventilation
Well ventilated area.
8.2. Exposure controls
Respirators
In case of inadequate ventilation or risk of inhalation of vapours, use suitable respiratory
equipment with combination filter type A (Brown)/P2. Standard EN 149.
Protective gloves
Risk of contact: Use protective gloves made of: Nitrile. Neoprene. Time of breakthrough is not
known, change gloves regulary. Suitable glove must be chosen in consultation with the
gloves supplier, giving information of the breakthrough time for
4
/
9
Created by SafeProduction™