User manual

4. Control unit

4.1 Prior to initial use

The standard delivery package of the e-fix includes the mounting of its various

components. It is, however, advisable to remove several components from the wheelchair,

for instance, if you want to transport the wheelchair in a car. You gain more space or

make better use of the existing space in your trunk.

4.2 Removal of the control unit for transport

· Deactivate the e-fix by pressing the power button [19] - the display is no longer

illuminated [20].

· Remove the plug [21] from the control unit. Pull the plug and not the cable!

· Remove the control unit [18] and its connecting tube [27] from the mount [28].

· Place the control unit plug [21] in the battery bag.

· Store the control unit [18] safely and securely during transport.

Alternatively, the control unit [18] can be removed from the adjustment plate [29], so

that it can be operated by an attendant via a bracket on the back of the wheelchair

(see chapter 10).

· Remove the plug [21] from the control unit. Pull the plug and not the cable!

· Release the clamping lever [30].

· Push the control unit [18] out of the sliding piece [29].

4.3 Installing the control unit

· Remove the plug of the control unit from the battery bag and insert it in the

socket [22] on the control unit.

· Insert the connection pipe [27] together with the control unit in the mount [28] on

the wheelchair.

Proceed as follows if the control unit for the control system has been removed from the

sliding piece [29] by an attendant person:

· Slide the control unit [18] into the sliding piece [29].

· Tighten the clamping lever [30].

· Insert the plug [21] into the control unit [18].

Your e-fix is now ready for use again.

BDA_E25_innen_GB_USA_final.indd 10 10.07.2008 12:06:58 Uhr