Operating instructions

BDA_S30_GB_final_Pfade.fh11 07.12.2009 11:57 Uhr Seite 30
Probedruck
C M Y CM MY CY CMY K
30
·
Move up two steps above the level of the wheelchair.
· Pull the scalamobil against the lowest step.
· Push the driving switch [2]; the scalamobil begins
climbing. (As soon as you release the driving switch [2],
the climbing process is interrupted immediately; the
wheels stand still).
The inner pair of wheels touches down on the first step.
At the same time the scalamobil with the attached wheelchair
is lifted. As soon as all four wheels are in a parallel position
once more, the first step has been climbed – the climbing
cycle has been completed.
When climbing regular stairs with standard depth, you may
push the driving switch [2] continuously (recommended for
skilled users only) and climb step after step without
interruption.
When climbing stairs with an extremely high depth, interrupt
the climbing process until you have pulled both pairs of
wheels in parallel position to the next step’s edge.
During the climbing process always pull the
scalamobil towards you. Also the scalamobil
plus wheelchair needs to remain in the same
tilted, balanced position all the time. Never release the
grips of the scalamobil!