User manual

ManualsBrandsALBRECHT ManualsCB RadioCB radio AE-6891

Quick Guide AE 6891

The most important functions on a glance

Program country setting before first use:

80/40

D, CZ, SK

40/40 EU B, BG, CH, D, E, EST, F, FIN, FL, GR, IRL, I, LV, NL, P, PL, RO

Please note the still different licensing and charge regulations in some

countries (see device ID!).

40/40 E E, IT, and new Europe CEPT Standard from July 2011: AM 4 Watts, FM 4

Watts, 40 channels.

Please note the standards in most countries must still be implemented.

40FM EC Previous CEPT setting for countries without AM

For temporary use while travelling in all EU countries when it is unknown

which standard applies. Unfortunately, in Austria the use of switchable radios

is not permitted, this applies also for 40 FM mode.

Country code:

Press the

button, select the country code with the channel selector and

press the MT button again.

Functions

Switch device on/off

VR Set volume

FC Function button: briefly press the VR rotary knob, FC is displayed. Now select

secondary function. Secondary functions are printed in white next to the

buttons.

A/F Select modulation mode (AM or FM, if activated)

CH / UP / DN Select radio channel

SQ Squelch: turn clockwise for repressing weak signals. At right limit stop only

strong signals come through. Best setting is where the background noise just

disappears.

ASQ Automatic squelch on/off

PTT

Press and hold the push-to-talk button on the side of the microphone for

transmission. Talking distance: some cm

SC Channel SCAN on/off: briefly press the SC button

DW Dual watch monitoring. Select channel, press the DW button, then select

secondary channel

LOC FC + LOC Local/DX selection (receiver sensitivity)

BP Key beep tones on/off: press and hold the VR rotary knob (3s)

RB FC + RB Roger beep on/off

CH 9

Direct selection channel 9 and return to previous channel

TON

Press

channel selector:

tone filter

on/off

FRQ Frequency display instead of channel number

M1 to M 4 Select memory: briefly press FC + M1, M2, M3 or M4

Change memory: select channel, then press FC + press and hold M1, M2,

M3 or M4.