Instructions

33English
EN
6. DAB/DAB+ Mode
DAB radio mode receives DAB/DAB+ digital radio and displays information about the station.
To enter DAB Mode, press to choose DAB and press OK.
For optimal performance make sure that the antenna is correctly adjusted to get the maximum
signal strength and the best possible sound quality (also for FM). The icon on the bottom right
corner of the display shows the strength of the DAB/DAB+ signal detected by the device.
6.1. Scanning for DAB stations
The rst time you select DAB radio mode, or if the station list is
empty, DR 890 CD automatically performs a full scan to search
for available stations.
Once the scan is complete, the radio shows a list of available
stations
If you wish to do a DAB scan later again, press and hold MENU to
enter the menu where you can select Scan and conrm with OK.
The station list will be updated accordingly.
6.2. Station List
To change a station, press ▲/▼ on the remote control, select a station and press OK. Once
selected, the station starts playing and the screen shows information about the station, track or
show. Or press and hold MENU to enter the menu, then select Station List to view the list of
stations already scanned. Rotating the navigation knob or press ▲/▼ on the remote control to
select the station you want to listen and press OK to conrm.
6.3. Station Order
The stations can be sorted in 3 different ways: Alphanumeric, Ensemble or Valid.
Press and hold MENU to enter the menu, select and press OK to conrm.
6.4. Preset a Stations
While listening to a DAB+ station, long press until the Save to Preset menu opens. Select one
of the 20 presets to save the currently playing station with OK. You can also easily store a station
on a specic preset number by pressing and holding 1-10 key on the remote control.
6.5. Recall a Stations
Short press to go to the Recall from Preset menu select the desired station and conrm with
OK. A preset can also be recalled by short pressing its corresponding 1 to 10 key on the remote
control. When a preset station is playing, it shows (1, 2, 3, etc) at the bottom of the screen.
6.6. Manual Tune
As well as the normal method of scanning and selecting stations from a list, you can also tune
manually to a particular channel/frequency. To manually tune press and hold MENU to enter the
menu, select Manual Tune and choose a particular channel/frequency and press OK to conrm
6.7. DAB Display Information
While the DAB radio is playing, the display shows information about the current song. To view
further information, press INFO. Each time you press INFO, another set of information is displayed,
cycling through DLS text, signal strength, programme type, ensemble name, channel number/
frequency, signal error rate, bit rate/codec, time and date.
6.7.1. DAB+ Slideshow
Additionally DAB+ is also able to show slideshow pictures transmitted by the radio stations.
In order to switch to full screen, press OK. To minimize press OK again
Stations: 15
Scanning
/
DAB