Instructions

36 English
EN
9.2. Repeat/shufe
Short press REPEAT on the remote control to swap among normal playback, repeat one, repeat all
(and repeat folder for MP3 / WMA CD).
Press and hold SHUFFLE to turn on/off the function of random.
9.3. CD track programming
Stop the playback rst if any track is playing.
Press to program. Set the rst programming track, use or to seek the track. Press OK to
conrm and set the next programming track.
Repeat the steps. When programming is completed, press .
Press to start playing the programmed track(s).
9.4. MP3 / WMA CD
DR 890 CD is able to play CD-R and CD-RW discs containing MP3 and WMA les. It is assumed in
this section that a le is equivalent to a CD track.
Playback controls are the same as „9.1. Playback“, “8.2. Repeat/Shufe” and „9.3. CD track
programming“. In addition, DR 890 CD allows to skip folders by pressing FOLDER UP or FOLDER
DOWN on the remote control. The rst le of the next or previous folder will be played and you can
also display additional Information by pressing INFO.
A MP3 / WMA CD may not contain more than 512 les and not more than 99 folders. MP3 and WMA
les should be created with an audio sample rate of 44.1kHz (this is normal for les created from
CD audio content).
MP3 and WMA data rates up to 320 KBit per second are supported. WMA Lossless les are not
supported. The unit will not play les which include digital rights management (DRM) protection.
When burning CD-R and CD-RW discs with audio les, various problems may arise which could lead
to problems with playback. Typically such problems are caused by poor CD writing or audio encoding
software, or by the hardware settings of the PC’s CD writer, or by the CD being used. Should such
problems arise, contact the customer services of your CD writer or software manufacturer or look in
their product documentation for relevant information. When you are making audio CDs, take care to
observe all legal guidelines and ensure that the copyright of third parties is not infringed.
10. Aux-In Mode
Aux-In mode plays audio from an external source such as an MP3
player. To use the Aux-In mode:
• Turn the volume low on both DR 890 CD and, if adjustable,
the audio source device.
• Connect the external audio source to the Aux-In 3.5mm
stereo socket on the frontside.
• Press , then move to Aux-In and press OK.
• Adjust the volume of DR 890 CD (and, if necessary, the audio
source device) as required.
11. Podcasts
DR 890 CD can play thousands of podcasts from around the
world through a broadband internet connection. When you select
Podscasts, DR 890 CD directly contacts the Podcast directory to
get a list of programs.
Auxiliary input
Audio In
03:28
Today’s Date:
23/08/2013