Instructions

45English
English
If you select Power Saving you can select the level to which the display is dimmed down when the
radio enters the Standby mode or when the radio gets no key input for 15 seconds.
The Turn On options keeps the display illumination always on. If you select it you can choose how
bright the display shall be.
See below table how the Dimmer settings will affect the screen illumination:
Choice Brightness level On Playing On Standby
Power Saving As you set
After 15s, the screen
brightness switches to
Power saving brightness
level you set
After 15s, the screen
brightness switches to
Power saving brightness
level you set
Turn On As you set
The screen stays always
on the set brightness level
After 15s, the screen
brightness switches to
Power saving brightness
level you set
12.10. Display
Choose the style of display: Color or Monochrome
12.11. Power Management
Choose the power management timer (5/15/30mins) to set the duration of the radio to switch to the
standby mode automatically when no network connection is available.
Choose “Turn off” to ignore the power management function.
12.12. Sleep timer
Turn off or set the sleep time to 15/30/60/90/120/150/180 minutes. Once the time is set, there will be
a bed icon with remaining minutes at the top right corner. The DR 450 will shut down once the time
runs out. Press Sleep on the remote control for the shortcut of this function. Pressing and holding
the button calls up the sleep radio, see Chapter 7 Local radio