Manual
52 English
English
13.20. Bluetooth
Here you can congure the Bluetooth mode. In receiver mode (Rx), the DR 463+ can receive and
play back audio from other devices (e.g. smartphone).
In transmit mode (Tx), audio can be transmitted from the DR 463+ (e.g. DAB+ radio) to a Bluetooth
speaker or headphone. After selecting this mode, the DR 463+ automatically searches for visible
Bluetooth devices. Consult the instructions for your device to set it to pairing mode beforehand.
If a Bluetooth loudspeaker is connected to the DR 463+, its audio output can be deactivated/
activated in the new menu point „Tx Speaker“.
13.21. Resume When Power On
The system is default set to resume internet radio playback if you were listening to internet radio or
media center before switch off the unit. If you turn this setting off, the system will start in the main
menu when switching on the unit.
13.22. Software-Update
Update software. If there is an updated software version on the server, the system will notify you
when you return to the main menu.
13.23. Factory Reset
Restore the default settings.
After DR 463+ is reset, the system will move to Language setting menu. And it will automatically turn
to Network setting menu once the OSD language is selected