Instructions

21English
English
10. Trouble shooting
Error Remedy
The device does not switch on or
turnes off suddenly.
1. Check if the power adaptor is connected properly.
2. The device may malfunction when used in areas with
strong radio interference. The device will work properly
again once interference ceases.
3. The normal function of the product may be disturbed by
strong Electro-Magnetic Interference. If so, simply reset
the product to resume normal operation by following the
procedures specied on instruction manual. If failure
persists, try to use the product in other location.
No Power 1. Ensure that the power adaptor is plugged to the power
socket securely.
2. Ensure that the battery has been charged. If battery
power is low, charge the device by connecting the power
adaptor.
No Sound or lower sound 1. Turn up the volume as it may be muted.
2. For AUX IN mode, check if the audio cable is connected
properly and the volume of the audio source is set high
enough.
No signal or hiss in DAB/FM mode. 1. Check the antenna if properly installed or move the
antenna to another position. Try to adjust the length of
antenna.
2. Move the device to another location.
Cannot connect with the device
via Bluetooth.
1. The device is connected with another Bluetooth-
enabled device. Disconnect that device and then try
again.
Alarm doesn’t work. 1. Switch on the alarm.
2. The volume may not be properly set, refer to the
solutions of “No sound or lower sound”.
3. The source of alarm was set to a station without signal.
Change the source of alarm or refer to “No signal or hiss
in DAB/FM mode”.