ALBRECHT ATR 200 Anleitung / Manual Deutsch / English / Français / Italiano
Inhalt 1. Bedienungsanleitung ������������������������������������������������������������������������������������������� 2. Bedienelemente �������������������������������������������������������������������������������������������������� 3. Funkbetrieb ��������������������������������������������������������������������������������������������������������� 3.1. Ein/Aus ������������������������������������������������������������������������������������������������������������� 3.2.
2. Bedienelemente 11 1 13 4 8 12 14 2 3 5 6 7 9 10 1. Antenne 2. Tastensperre 3. Gürtelclip 4. Gürtelclip-Verriegelung 5. Abwärts-Taste ▼ 8. LED-Anzeige 9. 3,5-mm-Kopfhöreranschluss 10. Micro-USB-Anschluss 11. Tastensperre 12. Kanal 6. Aufwärts-Taste ▲, PTT 7. Ein/Aus-/Menü-Taste 13. CTCSS/Lautstärke-Anzeige 14.
3. Funkbetrieb Der Akku des ATR200 sollte vor der ersten Verwendung vollständig geladen sein. Um es möglichst klein zu halten, enthält dieses Gerät keinen Lautsprecher. Dementsprechend muss ein Kopfhörer verwendet werden, um empfangene Signale zu hören. 3.1. Ein/Aus Drücken und halten Sie die Taste ‘M’ für 2 Sekunden, um das Gerät einzuschalten. Die LCD-Anzeige zeigt zunächst für 2 Sekunden den Akkuladestand von 1 bis 5 an. Danach werden der aktive Kanal und der CTCSS-Code angezeigt.
3.5. Akkustandanzeige Immer wenn das Gerät eingeschaltet wird, wird für zwei Sekunden der Ladestand (1 bis 5) angezeigt. Wenn das Gerät bereits eingeschaltet ist, muss das Gerät kurz aus und dann wieder eingeschaltet werden. 3.6. Das Gerät laden Verbinden Sie mit dem entsprechenden Kabel den Micro-USB-Anschluss des ATR200 mit dem USB-Netzteil oder mit einer anderen USB-Quelle. Während des Ladevorgangs blinkt die LED-Anzeige rot. Die LEDAnzeige erlischt, wenn der Akku vollgeladen ist.
4. Europäische Gewährleistung von 2 Jahren Der Vertriebshändler, Händler oder Einzelhandel garantiert dem ersten Einzelhandelskäufer dieses Produkts, dass, falls sich dieses Produkt oder ein Teil davon innerhalb von 2 Jahren nach dem ersten Kauf bei normaler Nutzung und unter normalen Umständen aufgrund eines Materialfehlers oder fehlerhafter Verarbeitung als defekt erweist, solch ein bzw.
5. CE-Konformitätserklärung Dieses Gerät entspricht allen relevanten europäischen Normen und Richtlinien für PMR446-Funkgeräte. Dieses Funkgerät darf nur in der EU und in Staaten verwendet werden, die die FuTKEE-Richtlinie der Europäischen Gemeinschaft anwenden. Dieses Gerät entspricht den europäischen R&TTE, EMC und LVD Richtlinien und harmonisierten Normen EN 300 296-2 V1.4.1, EN 301 489-1 V1.9.2, EN 301 489-05 V1.3.1 und EN 60 950-1: 2006 2nd ed.
7. Service-Hinweise und Dokumentation Sie können die neuesten Versionen der Benutzerhandbücher und die Konformitätserklärung unter http://www.service.alan-electronics.de herunterladen. Sollten Sie ein Problem haben, lesen Sie die Service-Tipps oder häufig gestellten Fragen (FAQ), bevor Sie das Gerät an das Servicezentrum einschicken. Service-Partner in Deutschland (nur für in Deutschland verkaufte Funkgeräte): Alan Service c/o Transerv2000 Repair Service GmbH & Co. KG Robert-Bosch-Str.
ALBRECHT ATR 200 Manual English
Inhalt 1. Instructions for Use ������������������������������������������������������������������������������������������� 2. Controls ������������������������������������������������������������������������������������������������������������� 3. Operation ����������������������������������������������������������������������������������������������������������� 3.1. Power On/Off �������������������������������������������������������������������������������������������������� 3.2.
2. Controls 11 1 13 8 4 12 2 5 3 14 6 7 9 10 1. Antenna 8. LED indicator 2. Keylock switch 9. 3.5 mm headset jack 3. Belt attachment 10. Micro USB jack 4. Belt clip latch 11. Keylock 5. Down ▼ button 12. Channel Memory Number 6. Up ▲ button 13. CTCSS/Volume displayed 7. Power/Menu button 14.
3. Operation The battery inside the ATR200 should be fully charged prior to the first usage. To achieve a smallest outline, this device does not incorporate a loudspeaker. Thus a headset must always be used to hear received signals. 3.1. Power On/Off Press and hold the ‘M’ key for 2 seconds to turn on the device. The LCD initially displays the battery level from 1 to 5 for two seconds. Thereafter, the active channel and CTCSS code is displayed. Press and hold ‘M’ again for 2 seconds to switch the radio off.
3.5. Battery level display Whenever the device is turned on, the state of charge (1 to 5) is displayed for two seconds. If the device is already switched on, the device must be briefly switched off and on again. 3.6. Charging the Device Connect the Micro-USB jack of the ATR200 with the respective cable to the USB AC- adapter or to another USB Source. During charging, the status LED lights red. The LED turns off when the battery is fully charged.
4. European 2 years warranty The distributor, dealer or retail shop warrants to the original retail purchaser of this product that should this product or any part of it, under normal use and conditions, be proven defective in material or workmanship within 2 years from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the company’s option) without charge for parts and repair labor.
5. CE- Declaration of Conformity This unit complies to all relevant European Standards and Regulations for PMR446 radios. This radio may be used only in EU and other states applying the R&TTE directive of the European Community. This unit complies to the European R&TTE, EMC and LVD Directives and harmonized standards EN 300 296-2 V1.4.1, EN 301 489-1 V1.9.2, EN 301 489-05 V1.3.1 and EN 60 950-1:2006 2nd ed .
7. Where to find service hints and documentation You can download the latest versions of user manuals and the declaration of conformity from http://www.service.alan-electronics.de If you should have a problem, please have a look to the service hints or frequently asked questions (FAQ) before you send your device back to the service center. Service partner in Germany (only for radios sold in Germany): Alan Service c/o Transerv2000 Repair Service GmbH & Co. KG Robert-Bosch-Str.
ALBRECHT ATR 200 Manuel Français
Sommaire 1. Guide d’utilisation ���������������������������������������������������������������������������������������������� 18 2. Commandes ������������������������������������������������������������������������������������������������������ 19 3. Utilisation de la radio ����������������������������������������������������������������������������������������� 20 3.1. Mise en marche/arrêt ������������������������������������������������������������������������������������� 20 3.2.
2. Commandes 11 1 13 4 8 12 14 2 3 5 6 7 9 10 1. Antenne 2. Touche de verrouillage des touches 3. Attache de ceinture 4. Loquet d’agrafe de ceinture 8. Témoin 9. Sortie casque 3,5 mm 10. Port micro USB 11. Touche de verrouillage des touches 5. Touche bas▼ 6. Touche haut ▲ 7. Touche Alimentation/Menu 12. Canal 13. CTCSS / Niveau de volume 14.
3. Utilisation de la radio La batterie de l'ATR200 doit être complètement chargée avant la première utilisation. Cet appareil n’a pas été doté de haut-parleur pour maintenir sa taille réduite. Ainsi, un casque doit être toujours utilisé pour entendre les signaux reçus. 3.1. Mise en marche/arrêt Maintenez appuyée la touche « M » pendant 2 secondes pour allumer l'appareil. L'écran LCD affiche le niveau de batterie de 1 à 5 pendant deux secondes. Puis, le canal actif et le code CTCSS sont affichés.
3.5. Affichage du niveau de la batterie Chaque fois que l'appareil est allumé, l'état de charge (1 à 5) est affiché pendant deux secondes. Si l'appareil est déjà allumé, il doit être éteint puis rallumé. 3.6. Recharge de l'appareil Branchez le connecteur micro USB du câble de l'ATR200 dans l'adaptateur secteur USB ou dans une autre source d’alimentation USB. Pendant la charge, le témoin s’allume en rouge. Le témoin s'éteint dès que la batterie est complètement chargée.
4. Garantie européenne de 2 ans Le distributeur, revendeur ou vendeur en détail, garantit à l'acheteur en détail initial de ce produit qu'au cas où ce produit ou un composant de celui-ci, dans des conditions d'utilisation normales, s'avérerait défectueux en matériel ou en main d'œuvre pendant une période de 2 ans à compter de la date d'achat initiale, que de tels défauts seront réparés ou les composant remplacés (à la discrétion de la société) gratuitement.
5. Déclaration de Conformité CE Cet appareil est conforme à toutes les normes européennes pertinentes et les règlements pour le service de radio PMR446. Cette radio peut être utilisée uniquement dans l'Union Européenne et dans d'autres États appliquant la directive R&TTE de Communauté européenne. Cet appareil est conforme aux directives européenne R&TTE, EMC et LVD et aux normes harmonisées EN 300 296-2 V1.4.1, EN 301 489-1 V1.9.2, EN 301 489-05 V1.3.1 et EN 60 950-1:2006 2nd ed.
7. Accès à des conseils ou de la documentation en matière de réparation de votre appareil Vous pouvez télécharger les dernières versions des guides d'utilisation et de la déclaration de conformité sur http://www.service.alan-electronics.de Si vous avez un problème, consultez les conseils de service ou les questions fréquemment posées (FAQ) avant d'envoyer votre appareil au centre de services.
ALBRECHT ATR 200 Manuale Italiano
Sommario 1. Istruzioni per l‘uso (Istruzioni Generali PMR) ���������������������������������������������������� 2. Comandi ������������������������������������������������������������������������������������������������������������ 3. Funzionamento della radio �������������������������������������������������������������������������������� 3.1. Accensione/spegnimento ������������������������������������������������������������������������������� 3.2.
2. Comandi 11 1 15 4 8 14 17 2 3 5 6 7 9 10 1. Antenna 2. Interruttore blocco tasti 3. Aggancio cintura 4. Blocco clip per cintura 5. Pulsante Giù ▼ 6. Pulsante Su ▲ 7. Pulsante Accensione/Menu 8. Indicatore LED 9. Jack cuffia da 3,5 mm 10. Jack Micro USB 11. Interruttore blocco tasti 12. Canale 13. CTCSS / Livello volume 14.
3. Funzionamento della radio La batteria interna all'ATR200 deve essere completamente caricata prima del primo utilizzo. Per ottenere una linea più piccola, questo dispositivo non incorpora un altoparlante. Quindi una cuffia deve essere sempre utilizzata per ascoltare i segnali ricevuti. 3.1. Accensione/spegnimento Premere e tenere premuto il tasto ‘M’ per 2 secondi per accedere il dispositivo. L'LCD inizialmente mostra i livello della batteria da 1 a 5 per due secondi.
3.5. Display livello batteria Quando il dispositivo è acceso, lo stato della carica (da 1 a 5) è visualizzato per due secondi. Se il dispositivo è già acceso, deve essere spento e riacceso brevemente. 3.6. Caricamento del dispositivo Collegare il jack Micro USB dell'ATR200 con il rispettivo cavo all'adattatore USB CA o altra sorgente USB. Durante la carica, il LED di stato si accende rosso. Il LED si spegne quando la batteria è completamente carica.
4. Garanzia europea di 2 anni Il negozio distributore, fornitore o rivenditore garantisce all'acquirente originale del prodotto che, qualora esso dovesse, in tutto o in parte, risultare difettoso, in normali condizioni di utilizzo, nei materiali o nella manodopera, entro 2 anni dalla data dell'acquisto originale, tali difetti saranno riparati o il prodotto sarà sostituito da uno nuovo o rigenerato (a scelta del produttore), senza costi aggiuntivi per le parti sostituite o i lavori di riparazione.
5. Dichiarazione di Conformità CE Questa unità è conforme a tutti i principali Standard e Regolamenti Europei per radio PMR446. Questa radio può essere usata solo nell'UE o altri stati che applicano la direttiva R&TTE della Comunità Europea. Questa unità è conforme alle Direttive Europee R&TTE, EMC e LVD e standard armonizzati EN 300 296-2 V1.4.1, EN 301 489-1 V1.9.2, EN 301 489-05 V1.3.1 e EN 60 950-1:2006 2nd ed.
7. Dove trovare la documentazione e suggerimenti per l'assistenza È possibile scaricare le ultime versioni dei manuali utenti e la dichiarazione di conformità da http://www.service.alan-electronics.de In caso di problemi, consultare i suggerimenti per l'assistenza o le domande frequenti (FAQ) prima di inviare il proprio dispositivo al centro assistenza. Partner di assistenza in Germania (solo per radio vendute in Germania): Assistenza Alan c/o Transerv2000 Repair Service GmbH & Co. KG Robert-Bosch-Str.