Operation Manual

9
Switching to 80/40 channel system (Germany and CZ/SK only)
80/40 This position is only allowed to be used in Germany and CZ / SK,
because no other European country provides the German 80 FM
channels. (Note: In Czech Republic please use only FM and in Slovak
Republic use only FM on ch 1-40 & 70-80)
No individual licence is necessary, but restrictions are still in force in
certain German border regions, where transmitting on channels 41 – 80 is
not allowed or only with a special licence.
! Switch the radio off
! Press Up button and keep button pressed
! Switch on the radio at the same time
! Release the button
Switching to 40 Channels FM (the former CEPT system)
Europe-wide used 40 Channels FM mode. If You are not sure what is allowed in Your
country please ask local authorities before using the radio. If You should not need
any individual CB licence in Your home or guest country, You should use this country
switching as Your setting:
40 FM This is former “CEPT” mode, the programming which is allowed in most
countries (except Austria, Spain and Luxembourg). Here the radio works
on the international 40 Channels in FM mode. The Mode switch AM – FM
on the front side allows only receiving in AM and FM, but only transmitting
in FM mode ( in some countries You need a licence, even for 40 CH FM
only!)
To switch to this system
! Switch off the radio
! Press Up and Down simultaneously and keep pressed
! Switch on the radio again
! Release buttons
Please read carefully the “Radio Passport” or the “Circulation Card” in the last
chapter of this manual before reprogramming the unit. Take your home
country’s licence or the Circulation Card with You when travelling abroad and
using 40/40 or 80/40 mode.
Note: This radio utilises a CPU system especially developed for this radio. Other
(illegal) channel systems are not stored in the CPU system and are not available at
all.
Selecting the operating channel
! with Up or Down buttons on the radio You can continuously select channels. The
present channel is displayed.