User manual

20
Short manual AE 5090 XL – Fast to the point
The most important functions at a glance
Programming of the corresponding country settings (before first use)
Programming:
hold
SCAN/Multi-mode
key and turn on the radio. Select the desired
mode for Your country by turning the channel switch (see the following table and
radio passport). Switch off and on radio for storing.
VOL/ OFF
turn radio on, set desired volume
(counter clockwise = off-position)
DIM/Light Colour: push longer than 1,5s, Dim level: push less than 1 second
SQ - ASC Squelch SQ- and ASC-knob (first settings: completely counter clockwise)
Mic-Gain first setting: middle to completely clockwise
RF-G completely clockwise for the best receiving results
AM/FM chose the desired modulation , no function in FM only
Channel- select the desired channel (rotary switch or UP/ DOWN at microphone)
Switch
ASC turn clockwise till the noise will just start to mute
SQ turn clockwise till the lower Signals will disappears
Microphone
hold the PTT-button on the side until you finished transmitting (distance
5cm to 10cm
Memory 1- 5 select Memory: 1 - 5
M
Change memory: select channel, press
M
(Display shows ME) and afterwards
press 1 - 5
© Alan Electronics GmbH, February 2008
Multi Mode Channel Power Modulation
01 80 CH 4W/1W FM/AM
02 40/40 4W/1W FM/AM
03 40 4W FM only
04 40/40 4W/4W FM/AM (only Spain)
05 40/40 4W/4W FM/AM (only Poland)