User manual

Do not transmit without connecting the aerial and never touch the aerial during

transmission!

Please also take road safety into account! CB Radio (even when only receiving,

especially if volume is turned to maximum) can divert your attention from the road!

Road safety is of course to be given priority! Therefore only use Your ALBRECHT

AE 5090 XL when the traffic situation enables it to be used safely.

Front view

Country code setting before installation

Before You can use Your new CB radio the

first time, You should program it to the

correct country code. Press the SCAN/Multi-

Mode button

(1)

while the device is still off

and switch on your radio while keeping the

button pressed. Release the button. Now the

multi standard choice 01 to 05 will appear in

the display. Select the mode for Your

country by turning the channel switch (see

the following table and our radio passport).

Switch the radio off and on again after

selection of the country code.

Double potentiometer

Volume, RF Gain

and on/off

Memory-keys

Dual watch (DW) control

Microphone

volume

Channel

switch

Double

potentiometer

Squelch / ASC

Scan/

Multi-Mode

Button

AM-FM-

Button

DIM-/Light

Button

CH9

Button

Mod-

Power-

Dis