User manual

AE 540 as Base Station

Please respect possible restrictions in some countries (e.g. Germany), where safety distances from

antennas to other persons have to be declared when certain output power levels are exceeded.

For safety reasons, please do not operate this radio in high power position (25-30 Watts RF) with any

kind of indoor antennas. Indoor antenna radiation may interfere with other electronic devices in the

neighbourhood of your radio.

Operation

The operating elements, knobs and buttons are located on the microphone and front panel of your radio.

Front panel - and microphone knobs and - keys

• All knobs and keys are located in a way so

that you can key-in directly the most

important basic functions via one-touch

keys.

•

A second level of feature settings is

available as two-touch-functions. Initially,

you will press the FUNC key on the

microphone for less than 0.5 seconds,

followed by the other function key

•

You can reach the Setup Menu, used for

programming memory locations, DTMF and

CTCSS tones incl. Decoder / encoder

options, repeater shift settings, beep tones

and other rarely used features like TOT (time-

out-timer), by touching the FUNC key longer

than 0.5 seconds!