AE2990 AFS CB Handfunkgerät für AM, FM und SSB Bedienungsanleitung 1
Allgemeines: Das Albrecht Handfunkgerät AE 2990 AFS ist ein Multi-Standard CB Handfunkgerät, was auf alle in Europa vorkommenden Normen und Betriebsarten umgeschaltet werden kann. Das Gerät kann sowohl als Portabelgerät mit Akkus, als auch als Fahrzeuggerät oder als Feststation an Mobil- oder Stationsantennen, auch mit externer Speisung über 12 V Adapterkabel benutzt werden. Lizensierte Funkamateure können das Gerät problemlos auch in den Amateurfunkbereichen (10 m und 12 m Band) nutzen.
BEDIENUNG UND FUNKTIONEN Bedienelemente auf der Seite und Rückseite 1. Funktionsauswahl (FUNC): Mit dieser Taste können Sie einige sekundäre (Zweit-)Funktionen der Bedienelemente auf der Vorderseite des Funkgeräts aktivieren. Die Funktionen, die mit der FUNC-Taste aktiviert werden, sind beim Gerät mit blauen Buchstaben beschriftet. Dabei handelt es sich um folgende Funktionen: MS, M/SCN, RPT, und LOCK.
BESCHREIBUNG DER FUNKTIONEN (FORTSETZUNG) Bedienelemente auf der Frontplatte 4
Taste 1: Speicherprogrammierung und Speicherabruf Die Funktionen Memory Save (MS) und Memory Load (ML): Mit dieser Funktion können Sie eine bestimmte Frequenz und Betriebsart speichern (MS) und wieder aufrufen (ML). Siehe Speicherprogrammierung weiter unten und Anweisungen zum erneuten Aufrufen im nächsten Abschnitt. Speicherprogrammierung „M1 bis M5“ • Wählen Sie mit „AUFWÄRTS/ABWÄRTS“ die gewünschte Frequenz und die Betriebsart, die gespeichert werden sollen.
Taste 3. Betriebsarten-Umschaltung Modus: Auswahl zwischen den vier Betriebsarten des Funkgeräts (AM/FM/USB/LSB). Drücken Sie zum Wählen der gewünschten Betriebsart die Taste „Mode“, bis diese Betriebsart angezeigt wird. Die angezeigte Reihenfolge ist FM (Frequenzmodulation) , AM (Amplitudenmodulation) , USB (Upper Side Band, oberes Seitenband) und anschließend LSB (Lower Side Band, unteres Seitenband).
Taste 4 : STEP und Kanal / Frequenzanzeige: Die Funktion STEP (nur aktiv bei Amateurfunkfrequenzen, nicht aber im CB Funk) dient zum Wählen eines Frequenzschritts (1 kHz, 10 KHz und 100 KHz). „+“ und „-“ Shift-Funktion: Mit dieser Funktion können Sie bei Repeaterbetrieb im Amateurfunk die Shift-Offset-Frequenz aktivieren und höher oder niedriger als angezeigt senden oder die Frequenz empfangen. Drücken Sie zum Aktivieren zuerst die Taste „FUNC“ unmittelbar gefolgt von „STEP/CH.FR“.
Taste 6 : Rauschsperre SQ, Mikrofonverstärkung MICG, HF Verstärkung RF Gain und Repeatersteuerung RPT Die Rauschsperre SQ eliminiert Hintergrundrauschen oder „weißes“ Rauschen bei der Überwachung von starken Signalen. • Drücken Sie zum Aktivieren der Rauschsperre die Taste „SQ, MICG, RFG/RPT“ einmal und stellen Sie anschließend mit „Aufwärts“ und „Abwärts“ den gewünschten Punkt ein, bei dem das Hintergrundrauschen gerade aufhört.
Position 9. Batteriegehäuse: Abnehmbares Batteriegehäuse, das 9 „AA“"- Akkuzellen aufnehmen kann. (Siehe „Batterien“ für Installationsanweisungen). Wir empfehlen, nur NiMH Akkuzellen in diesem Funkgerät zu verwenden. Siehe auch den Abschnitt über den richtigen Umgang mit dem Batteriefach und den 12 V Direktanschluss! Länderumschaltung für den CB Funk Multi-Standard: Mit dieser Funktion können Sie die richtige Einstellung für den CB Funk im jeweiligen Land auswählen.
Sonstige Funktionen Signalton und Roger Beep : Um den Signalton und Roger Beep zu aktivieren, halten Sie „SCN/M/SCN“ für 3 Sek. angezeigt. gedrückt. Auf dem Display wird das Ton-Symbol Drücken Sie erneut SCN/M/SCN, um Roger Beep zu aktivieren. Das Ton-Symbol wechselt zum Doppel-Noten-Symbol . Schalten Sie anschließend mit „AUFWÄRTS/ABWÄRTS“ den Signalton und Roger Beep ein oder aus. Displaybeleuchtung: Beleuchtet das gesamte LC-Display für den Einsatz bei Dunkelheit oder in der Nacht.
Alle Flüssigkristall-Displays haben einen bevorzugten Betrachtungswinkel, bei dem der Kontrast des Displays am größten ist. Der beste Betrachtungspunkt hängt vom Benutzer, Variablen wie Temperatur, Luftfeuchtigkeit, Batteriezustand und dem tatsächlichen Sehvermögen des Benutzers ab. A. TX: Zeigt an, dass sich das Funkgerät im „Sende“-Modus befindet. B. Funktionsmodus: Mit FUN wird angezeigt, dass die FUNC-Taste gewählt wurde. Diese ermöglicht die Verwendung vieler Funktionen im „Sende“Modus. C.
R. LSB: Zeigt den unterer Seitenband-Betrieb an. S. USB: T. AM: U. FM: Zeigt den oberen Seitenband-Betrieb an. Zeigt den AM-Betrieb an. Zeigt den FM-Betrieb an. V. RGB-Ton: Zeigt an, dass der Roger-Beep-Ton beim Loslassen der PTTTaste aktiviert wurde. Der richtige Umgang mit Batteriepack und 12 V Direktanschluss Wir raten für maximale Ausgangsleistung und Leistung des Geräts dringend, ausschließlich NiMH Akkus der Größe AA (= Mignon) in Ihrem Batteriepack zu verwenden.
optimierten Schnellladegerät zusammen angeboten. Von Albrecht kann das zeitgesteuerte Standladegerät DG 630 oder unterwegs auch der Steckerlader 10104 benutzt werden. Das Steckerladegerät benötigt ca. 16 Stunden Übernacht-Ladung bei 1800 mAh Zellen und kann auch zum Nachladen unterwegs dienen. Warnung: Mischen Sie niemals Batterien /Akkus unterschiedlicher Hersteller oder leere mit vollen Batterien zu einem Batteriesatz.
CB Bestimmungen, Gerätepass und CE Deklaration Für Ihr AE 2990 AFS gelten folgende Programmierungs- und Benutzungsregeln (Angaben ohne Gewähr, Stand November 2010) in den Ländern, die die Europäische R&TTE Direktive anwenden: Land Programmierung Anmelde- und Gebührenpflicht Betreiben der Funkanlagen mit Anmeldepflicht bzw. Einschränkungen Italien 40 FM , AM und SSB Anmeldung für Einwohner Österreich 40 FM Funkgeräte mit Länderschaltern und AM / SSB dürfen in Österreich zur Zeit (noch) nicht benutzt werden.
Declaration of Conformity / Konformitätserklärung We hereby declare that our product: / Wir erklären hiermit, dass unser Produkt CB-Radio Albrecht AE 2990 AFS satisfies all technical regulations applicable to the product within the scope of EU Council Directives, European Standards and national frequency applications:/ alle technischen Anforderungen im Geltungsbereich der EU Richtlinien, europäischer Normen und nationaler Frequenzanwendungen einhält: 73/23/EEC (LVD) , 2004/108/EG (EMC) and 99/5/EC (R&TTE
dispuesto en la Directiva 9/05/CE, del Parlamento Europeo y del Consejo de 9 de marzo de 1999, transpuesta a la legislacion espanola mediante el Real Decreto 1890/2000, de 20 de noviembre. Point of contact/Ansprechpartner: Dipl.-Phys. Wolfgang Schnorrenberg Place and date of issue: Dreieich, 2.11.2010 (Signature) Dipl.-Phys. Wolfgang Schnorrenberg Alan Electronics GmbH Diese Konformitätserklärung und der Albrecht Gerätepass werden regelmäßig aktualisiert und sind unter www.hobbyradio.
AE2990 AFS CB Handheld Radio for AM, FM and SSB User Manual 17
General: Albrecht hand portable radio AE 2990 AFS is a Multi-Standard CB Radio, which can be switched to all CB standards used within Europe. The radio can be used as portable radio with rechargeable batteries, but as well as mobile radio with optional mobile adaptor or as CB base station in connection with an external antenna and an external power supply. Licensed ham radio operators may modify the radio easily to the 10 m and 12 m Band amateur radio frequency ranges.
OPERATING CONTROL AND FEATURES Side and Back Panel Features 1. Function Button (Func): This button allows for activation of the secondary feature in each of the front panel of the radio. The features that are activated by the FUNC button are those that are printed on the radio in blue letters. These features are the following: MS, M/SCN, RPT, and LOCK. In addition, the "Hi/Low" power function is controlled by the "FUNC" button, and CH.FR toggles between Frequency display and Channel number display.
DESCRIPTION OF FEATURES (CONT) Front Panel Features 20
Button 1. MS (Memory Save) and ML (Memory Load) Functions: This feature allows the user to save and recall specific frequency and operating mode. See Memory programming and Recall instructions. Memory Programming Memory Save “M1 to M5” • • • • • Using “UP/DOWN” buttons select the desired frequency and mode to be saved. Press and release “FUNC” button and then press the “ML/MS” button, notice the “M “icon blinking on the right side on the display. Then press “SCAN/M/SCN” button to save in memory M1.
In SSB (Single Side Band) you will have the Upper Side Band USB and the Lower Side Band LSB. SSB is the mode for the longest possible communication distances. All commercial short waves services use this long range mode. However, it is necessary to make a fine adjustment of the clarifier knob for best voice reproduction, and most listeners need a certain training period until they can understand SSB communication clearly.
Calling Frequency in amateur radio mode: For Call monitoring on call frequency 29.300MHz, just press "CH9/19 LOCK" button. 29.300 flashes appear on the display, press the mentioned button again, the flashes appear on the display change to 29.600 and the transceiver stays on frequency 29.300MHz and 29.600 as what has been selected. To release Call monitoring, press “CH9/19 LOCK” button. The previously selected frequency appears on the display.
RPT will appear on the LCD display indicating that the tone burst now automatically be transmitted whenever the PTT is pressed. To deactivate, repeat the same procedure. This function activated when the unit is in mode 1 (ham band) operation only. Position 7 : Speaker High quality, impact resistant output speaker for clear output reception. Position 8 : Electret Microphone Front mounted, electrostatic condenser microphone for clear high quality transmission power.
OTHER FUNCTIONS BEEP Tone and Roger Beep: To enable the beep tone and roger beep, press and hold the icon, press SCN/ M/SCN “SCN/ M/SCN” button for 3 sec. The display show up the button once again to activate the roger beep, the beep icon will change to Roger Beep icon , then use the UP/DOWN button to turn ON and OFF of beep and Roger beep sound. Display Lamp: Provides lighting of entire digital liquid crystal for use in the dark or night time application.
D. Scan: Indicates that the radio is in the Scan mode, which works in conjunction with all bands and country settings. E. RF-G: Indicates that the RF-G feature has been activated. F. MIC-G: Indicates that the Mic-Gain feature has been activated. G. PS: Indicates that the Power save feature has been activated. H. The key symbol indicates the key lock feature has been activated. I. "+/-": Indicates + and – shift mode. J. "м": Indicates that the Memory feature has been activated. K. Memory Nr.
BATTERY PACK INSTRUCTIONS For maximum power output and performance from the unit, we strongly recommend that you only use "AA" NiMH rechargeable batteries in your battery pack. Due to the voltage rating and power consumption of the radio, NiMH’s deliver superior performance and life than alkaline. These batteries are readily available from your radio dealer or other electronic stores.
Customer Support & Warranty matters Troubleshooting Check at first the power supply (batteries and their contact quality or the 12 V adapter/cable). A problem may be caused through power supply, when no light or display appears after switching on. If the unit works in a strange way, disconnect the power supply cable (or take off the battery case), wait some time (minimum 10 seconds), and then reconnect power again. Another method is to try a new country setting.
hints or FAQ’s any time from our server under http://www.service.alan-electronics.de If you should have a problem, please have a look to the service hints or frequently asked questions (FAQ) before you send Your CB radio to the service centre. Please note that the acceptance of AM, SSB+FM in the different European countries has just started and may be subject to unpredictable changes. Our homepage will provide the latest information about using the radio.
Legal Information and Conformity Declaration The radio may be used in European Countries only according to following information, which we publish as “Radio Passport”. Because the number of countries allowing the current and future AM+SSB+FM standard is changing, the latest version of this radio passport is published on our Internet web server and may be downloaded any time. (http://www.service.alan-electronics.de or www.hobbyradio.
AE2990 AFS Radio CB à AM, FM et SSB Mode d’Emploi 31
Multi-Standard Radio CB AE 2990 AFS FONCTIONS DES TOUCHES DE COMMANDES Fonctions du panneau supérieur 3 1 2 OFF CLAR SPK VOL MIC 4 1. Marche/Arrêt, Volume : Tournez ce bouton dans le sens horaire pour allumer et régler le niveau de volume. 2. Clarificateur : permet de faire varier les fréquences reçues qui sont supérieures ou inférieures à la fréquence du canal, même si cette touche est essentiellement conçue pour régler les signaux SSB. 3.
FONCTIONS DES TOUCHES DE COMMANDES Fonctions du panneau latéral et arrière 1. Touche fonction (FUNC) : Cette touche permet l'activation de la fonction secondaire de chaque touche du panneau avant de la radio. Les fonctions qui sont activées par la touche FUNC sont celles en lettres bleues. Ces fonctions sont les suivantes : MS, M/SCN, RPT et LOCK. En plus, la fonction de puissance "Haut/Bas" est contrôlée par la touche "FUNC" et fréquence / canaux avec CH.FR. 2.
DESCRIPTION DES FONCTIONS (SUITE) Fonctions du panneau avant 34
Bouton 1: Fonctions MS (Memory Save) et ML (Memory Load): Cette fonction permet à l'utilisateur de sauvegarder et de rappeler une fréquence spécifique et le mode de fonctionnement. Reportez-vous aux instructions de programmation et de rappel de la mémoire. Programmation de la mémoire "M1 à M5" • • Utilisez les touches "Haut/Bas" pour sélectionner la fréquence et le mode à sauvegarder.
fonction ne s'active que lorsque l'appareil est en mode 1 (bande de brouillage, seulement pour radio-amateurs avec license). Bouton 3 : Sélecteur Mode AM-FM-SSB Permet de choisir entre quatre modes de fonctionnement de la de la radio (AM/FM/SSB). Pour sélectionner un mode, appuyez sur la touche "Mode" jusqu'à ce que vous voyiez le mode désiré. L'ordre d'apparition est FM, AM, USB puis LSB (SSB = USB+LSB).
Les deux canaux spéciales sont utilisés par la communauté CB pour les appels d'urgence. Pour activer cette fréquence particulière appuyez sur la touche "CH9/19/LOCK" pour que la fréquence se règle automatiquement sur cette fréquence. Chaque fois que vous appuyez sur cette touche, l'affichage clignotant change de 9 à 19 puis à la fréquence précédemment sélectionnée.
Touche de commande du répéteur de tonalité d'accès CTCSS. La plupart des répéteurs en États Unis exigent 88,5Hz CTCSS pour accéder. • • Pour activer CTCSS 88.5Hz, appuyez sur la touche "FUNC" suivie de "SQ, MICG, RFG/RPT". RPT apparaît sur l'écran LCD pour indiquer que le signal CTCSS va être automatiquement transmise chaque fois que le PTT est appuyée.
Tonalité de bip et bip Roger ( « Roger Beep » ) : • • Pour activer la tonalité de bip et le bip Roger, maintenez enfoncée la touche "SCN/M/SCN" pendant 3 sec. L'écran affiche l'icône de bip appuyez à nouveau sur la touche "SCN/M/SCN" pour activer le bip Roger, l'icône de bip change en bip Roger , utilisez ensuite les touches Haut/Bas pour activer et désactiver le bip et le bip Roger. Lampe d'affichage : Permet d'éclairer l'écran à cristaux liquides pour une utilisation pendant la nuit ou par temps sombre.
A. TX Indique que la radio est dans le mode "transmission". B. Mode fonction Indique que la touche "FUNC" a été sélectionnée, ce qui permet l'utilisation de beaucoup de fonctions du mode "transmission". C. Faible : LOW indique que l'utilisateur a sélectionné le mode de puissance de sortie faible. Lorsque l'indicateur n'est pas affiché, la radio est en mode pleine puissance. D. Balayage SCAN indique que la radio est en mode Balayage, qui marche avec toutes les bandes. E.
INSTRUCTIONS SUR LES BATTERIES Pour obtenir la meilleure puissance et performance de l'appareil, il est fortement recommandé de n'utiliser que des piles "AA" NiMH. Etant donné la tension et la consommation de la radio, les piles NiMH offrent une meilleure performance et une durée de vie plus longue que les piles alcalines. Ces piles sont toujours disponibles auprès de votre revendeur ou d'autres magasins d'électronique.
Information importante Nous sommes légalement tenus d'inclure les dispositions et les informations de garantie et la déclaration de conformité de l'UE avec le mode d'emploi de chaque unité, et ce dans la langue de chaque pays. Veuillez trouvez ces informations dans les pages suivantes. Deux ans de garantie à compter de la date d’achat Le Fabricant/revendeur garantit ce produit pour deux ans à compter de la date d’achat.
AE2990 AFS D e u t s c h............................................................................................. 1 Bedienelemente auf der Oberseite ........................................................................... 2 Bedienelemente auf der Seite und Rückseite .......................................................... 3 Bedienelemente auf der Frontplatte ......................................................................... 4 Taste 1: Speicherprogrammierung und Speicherabruf ................
Fonctions spéciales Multi-Standard....................................................................... 38 Fonctions du panneau d'affichage .......................................................................... 39 INSTRUCTIONS SUR LES BATTERIES ............................................................... 41 Connection avec 12 V Puissance externe .............................................................. 41 Information importante ..................................................................