Instruction manual

INSTRUCTION MANUAL 5
ENGLISH
SUPPLIED EQUIPMENT
• Scanner Receiver
• Antenna
• Belt Clip
INSTALLING THE BATTERIES
Battery installation is made more convenient when the belt clip is removed. To do this,
release the spring clip securing the belt clip to radio and slide the belt clip downward
and away from the radio body. Next, press down with the thumb at the arrow, slide the
battery cover down and lift off the battery cover. Insert four AAA batteries (alternate
positive ends (+) toward the bottom of the transceiver (starting right to left).
1. Using thumb, press down on battery cover at arrow and slide cover down to open.
2. Slide the cover down and then lift cover at bottom to open. Remove cover.
3. Insert four AAA batteries (positive(+) end toward the bottom beginning at right
side
SPRING CLIP
BELT CLIP
BATTERY
COVER
POSITIVE
TERMINALS
NEGATIVE
TERMINALS
1) Place the antenna onto the antenna socket
on top of the radio.
2) Rotate the antenna clockwise to screw into
place.
3) Do not over tighten.
INSTALLING THE ANTENNA
AE 82 H/BT