User manual

Frequency Band Plan
European Frequency Band Plan
This band plan can be used in all regions of Europe. The default settings of this band plan are
suitable for many regions, but it can be necessary to select other frequency steps in certain
regions. The European Frequency Band Plan is more suitable for qualified users who know
already which setting parameters they need.
• The receiver has the German Band Plan as default setting. But the European Band
Plan setting is easily available via pressing
• F , release the button (display shows FC ) and then press REGION for longer than 2
seconds.
The two band plans can be toggled without loss of the settings or the memory.
Note: It is not possible to switch the band plans as long as the scanner is in memory mode.
Frequency table of ALL BAND start setting
• The table shows, in which sequence the bands appear in the display after repetitive
pressing of the BAND key.
• Within each of the selected bands, you can use the UP / DOWN buttons to select
frequencies with the default channel spacing.
Band
Name
Frequency Range
(MHz)
Mode (s)
default
Step (KHz)
possible
Step settings
Application
AIR
108.00 –136.9916 AM 8,33 8.33 / 25 kHz AIRCRAFT
VHF
144.00 - 173.9875 FM 12,5
5, 10, 12.5
20, 25
kHz
2m Amateur,
Marine Radio,
Freenet and
commercial band
CB10
25.0000 - 29.9900
FM
(default)
AM
10
+ 5 kHz
Offset
10 kHz with or
without 5 kHz
offset
CB + 10 METER
VLB
66.000 – 87.4875 FM 12,5
5, 10, 12.5,
20, 25 kHz
VHF LOW BAND
“4 m Band”
WFM
87.50 - 107.95 WFM 50 50/100
FM Broadcast
Radio