User manual

Selection of the Band (s)
As factory default, all 5 bands are activated. These are:
Air Band
VHF Band
(2 m Band)
CB 10 Band
VLB Band
(4 m Band)
WFM Band
(FM broadcast)
You can choose whether all bands should remain active or whether you do not need all the bands.
• Press F + B.SET
• You see now the band name of one band on top of the display. The example shows the AIR
Band
• Use UP / DOWN keys to select between on and off, if you wish to deactivate a band. ON and
OFF shows the status of the selected band.
• Repeat this procedure for each band you wish to activate or deactivate. You can select the
bands one after the other by means of the BAND key
• It is possible to delete all bands except one band – one band must remain active. If you have
already deactivated 4 of the 5 bands and try to deactivate the last band, you will hear a
warning sound (1 low and two high tones)