User manual

Memory Reset
It may be useful to erase the memories completely in one step, if necessary.
To reset the memory and keep all other settings
Press F
Release F and then keep BEEP pressed for at least 2 seconds
in the display rE SEt appears.
Keylock function
Press F + MONITOR
the key symbol appears
to unlock repeat the same procedure, the symbol will disappear
Display test mode
keep UP and LAMP pressed during power on. For a short moment, all display Icons will be on
for check.
Technical Specifications
Memory channels……………………………………………………………………..….. .200 channels
Frequency Ranges
WFM:……………………………………………………………………………………… 87.5 - 108 MHz
VHF:………………………………………………………………………………………. 144 - 174 MHz
VLB: ………………………………………………………………………….………………66 - 88 MHz
AIR :……………………………………………………………………………………….. 108 - 136 MHz
CB : ……………………………………………………………………………………… .25 - 29.69 MHz
Typical Receiver Sensitivity at 12dB SINAD
8
7.
5000
MHz-
(
WFM
)
0
.
9
µ
V
1
0
7.
950
MHz
(
WFM
)
0
.
9
µ
V
1
08
.
050
MHz
(
AM
)
0
.4
µ
V
135.500MHz
(
AM
)
0.4 uV
144.020MHz
(
FM
)
0.3 uV
173.450MHz
(
FM
)
0.3 uV
27.405MHz
(
FM
)
0.9
µ
V
Scan rate …………………………………………………………. 25 channels per second (Normal)
Search rate ………………………………………………………..….. 25 steps per second (Normal)
Priority sampling interval…………………………..…………………………………………2 seconds
IF Rejection………………………………………………………………………………………….65dB
1'st IF ………………………………………………………………………………….……...51.750MHz
2'nd IF……………………………………………………………………………………….…… 450KHz
Internal audio output …..……………………………………………………………1 Watt at 16 ohms
Internal speaker………………………………………………..…dynamic 40mm diameter, 16 ohms
DC Current at closed squelch …………………………………………………………………….35mA
Current drain with full audio output……………………………………………………..…max. 250mA
Battery power requirements …………………………………..……Alkaline AA x 3 or Mi-MH AA x 3
Antenna socket…………………………………………………………….. 50 ohms - BNC connector
External headphone socket………….……………………………………………...3.5mm Mono type
Weight ………………………………………………….………110 g (without batteries and Antenna)
Size………………………………………………………..…..56 mm (W) x 27 mm (D) x 106 mm (H)
Ext. DC power supply…………………………………………………………..8…..18 V DC, center +
DC charge current in MH switch position…………………………………..……………max. 150 mA