Specifications

Programming Channels

Before you can scan, you must program the channels

within a bank. You can store one frequency per channel, up

to 100 channels.

Note: If appears on the display (keypad Locked),

unlock the keypad by pressing and holding until

disappears

There are two ways to program a channel:

Manually select a channel and frequency, using the

numeric keypad.

Search a band to find an active frequency, and then

directly store it into a channel.

A. Programming By Manual Entry

1. Select a frequency from the appropriate

Frequency Directory.

Example:

Program 125.2500 MHz into Channel 18.

2. Make sure the scanner is in the SCAN Mode. If it is in

the SEARCH Mode, press .

3. Press to stop scanning.

4. Press to go to Channel 18.

5. Enter the frequency number using the numeric keypad.

(Be sure to include the decimal point.)

If you make a mistake and want to clear the entry,

press twice and re-enter the frequency.

6. Press to store the entry. The frequency on the

display will blink twice to confirm the programming.

Y:...UB302BH(AE180H).vp

Tue Jul 08 16:24:09 2003

Color profile: Disabled

Composite Default screen