Specifications

Included With Your Scanner

・ Owners Manual

・ Scanner with Antenna

・ Belt Clip

Note: If any of these items are missing or damaged,

contact your place of purchase.

Setting Up Your Scanner

These guidelines will help you install and use your new

scanner:

• If your scanner receives interference or electrical noise,

move the scanner or its antenna away from the source.

• To improve the scanner’s reception, use an optional

external antenna designed for multi-band coverage.

(You can purchase this type of antenna at a local

electronics store). If the optional antenna has no cable,

use 50-70 ohm coaxial cable for lead-in. A mating plug

might be necessary for the optional antennas.

• Use an optional mono earphone or mono headset with

proper impedance for private listening. Read the

precautions on the inside front cover of this Owners

Manual.

• Do not use the scanner in high-moisture environments

such as the kitchen or bathroom.

• Avoid placing the scanner in direct sunlight or

near heating elements or vents.

Installing and Replacing Batteries

You can power your scanner using three AA alkaline

batteries.

• Make sure the power is turned off.

• If the belt clip is attached, remove it (See page 13).

• Slide the battery compartment cover.

• Install three batteries in the compartment as indicated

by the polarity symbols (+ and -) marked inside.