Specifications

Connecting the Antenna

To attach the supplied flexible antenna to the connector on

the top of your scanner, align the slots around the antenna's

connector with the tabs on the scanner's BNC connector.

Then slide the antenna's connector down over the scanner's

connector and rotate the antenna connector's outer ring

clockwise until it locks into place.

Connecting an Optional Antenna

The scanner's BNC connector makes it easy to connect a

variety of optional antennas, including an external mobile

antenna or outdoor base station antenna.

Note: Always use 50-ohm, RG-58, or RG-8, coaxial cable to

connect an outdoor antenna. If the antenna is over 15

meters from the scanner, use RG-8 low-loss dielectric

coaxial cable. You can get a BNC adapter at your local

electronics store.

Connecting an Earphone/Headphone

For private listening, you can plug a 3.5mm mini-plug

earphone or mono headphones (not supplied) into the

headphone jack on top of your scanner. This automatically

disconnects the internal speaker.

WARNING!

If you connect an external speaker to the scanner's

headphone jack, never connect the audio output line to a