Specifications

20
scanning or searching. The scanner automatically sets a
delay when you store frequencies into channels or when you
search frequencies. When the delay feature is on, DLY
appears. If you set to 0, delay feature turn to off.
Follow these steps to set the delay time.
• Press FNC + DELAY.
• Repeatedly press
or to select delay time
• you want to set.
• Press PWR or wait for 2 seconds. The delay time is
stored, and the scanner returns to preset mode.
Note: Delay can be set both in Frequency Mode and
Memory Mode.
Search Skip
You can skip up to 40 specified frequencies during a search.
This lets you avoid unwanted frequencies in Search Mode.
• To skip a frequency, press L/O when the scanner stops
on the frequency in Search Mode or when you have
selected frequency manually in Search Hold Mode.
•
To cancel Search Skip for a single frequency, manually
select the frequency, then press L/O. L/O disappears.
• To cancel Search Skip for all the frequency you have
set Search Skip, press RSM/HOLD to stop searching
in Search Mode, then press and hold L/O.
• A confirmation tone sounds.
Note: If you select more than 40 frequencies to skip, the
oldest frequency will be deleted automatically.
Locking Out Channels in Memory
Mode
You can increase the scanning speed by locking out
channels that have a continuous transmission for all the
channels in Channel Memory.
• To lock out a channel, manually select the
channel, then press L/O. In the display, L/O
appears.
Note: You can still manually select locked-out channels.
To remove the lockout from a channel, manually select the
channel, then press L/O. L/O disappears.
• To unlock all channels in the band, press RSM/
HOLD to stop scanning in Memory mode, then