Specifications

21
press and hold L/O.
• A confirmation tone sounds.
Priority
The priority feature lets you scan through the channels and
still not miss important or interesting calls on specific
channels. You can program one stored channel in each
bank as a priority channel (3 channels for total).
If the priority feature is turned on, as the scanner scans the
bank, it checks that bank's priority channel for activity every
2 seconds.
The scanner automatically designates each bank's first
channel as its priority channel.
Follow these steps to select a different channel in a bank as
the priority channel.
• Manually select the channel you want to select as
the priority channel.
• Press FNC + PRI for two seconds. P appears
above the selected channel number.
Repeat these steps for the channel in each bank you want to
program as a priority channel.
Note: If all priority channel should be locked out, the display
will show error message All Loc. In such cases unlock at
least some of the channels.
Monitor
• While pressing and holding MON, Monitor Mode
is turned on, Squelch is open.
• To exit Monitor Mode, release MON.
Using Keylock
Use the scanner's keylock to protect it from accidental
program changes. When the scanner's keys are locked, the
only controls that operate are
, PWR, FNC, MON,
LIGHT and RSM/HOLD.
• To turn on keylock, press FNC +
• To turn off keylock, press FNC +
again.
The display shows the
symbol as long the keyboard is
blocked.
Note: Using keylock does not prevent the scanner from
scanning channels, when scanning had been started before
locking the keys.