Specifications

23
General Hints,Care & Maintenance
• Keep the scanner dry. If it gets wet, wipe it dry
immediately or use a hairdryer.
• Use and store the scanner only in normal temperature
environments.
• Handle the scanner carefully: do not drop it.
• Keep the scanner away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it looking new.
• Turn the scanner off before disconnecting the power.
• Always write down the programmed frequencies in the
event of memory loss.
• If memory is lost, simply reprogram each channel. The
display shows ------ in all channels when there has
been a memory loss.
• Always press each button firmly until you hear the entry
tone for that key entry.
• Do not use the scanner in high-moisture environments
such as the kitchen, bathroom or outdoors in rain.
• Avoid placing the unit in direct sunlight or near heating
elements or vents.
• If the scanner receives strong interference or electrical
noise, move it or its antenna away from the source of
the noise. If possible, a higher elevation might provide
better reception.
• Also try changing the height or angle of the antenna.
• Disconnect the power to the unit before cleaning.
• Clean the outside of the scanner with a mild detergent.
Do not use excessive amounts of water!
• To prevent scratches, do not use abrasive cleaners or
solvents. Be careful not to rub the LCD window.