Operation Manual

SETTING UP YOUR SCANNER

•

Install three batteries in the compartment as indicated by the

polarity symbols (+ and -) marked inside.

•

Replace the cover.

USING RECHARGEABLE BATTERIES

You can also use three rechargeable batteries (Ni-MH) to power

your scanner. Before you use rechargeable batteries, make sure

the batteries are fully charged.

CAUTIONS:

• Use only fresh batteries of the required size and recommended

type.

• Always remove old or weak batteries. Batteries can leak

chemicals that destroy electronic circuits.

• Do not mix old and new batteries, different types of batteries

(standard, alkaline, or rechargeable), or rechargeable batteries

of different capacities.