Operation Manual

23
TROUBLESHOOTING & WARRANTY
If your AE33H is not performing properly, try the following steps.
Problem Possible Cause Suggestion
Improper
reception.
The scanner’s
antenna might need
to be adjusted.
Check the antenna connection or
move or reposition the antenna.
Move the scanner.
You might be in a remote area
that could require an optional
multi-band antenna. Check with
your dealer or local electronics
store.
Scan won’t
stop.
The squelch might
need to be adjusted.
Adjust the squelch threshold.
See “To adjust the squelch” on
page 17.
The antenna might
need to be adjusted.
Check the antenna connection.
The channel’s
frequency might not
be stored in
favourites.
Make sure the channel’s
frequency is stored in the
scanner’s favourites bank.
The channel might
not be active.
Wait for a transmission on the
channel.
Scan won’t
start.
The scanner must
be in service or
favourites mode.
Press (Srvc/Fav). If is
showing press (Hold) to resume.
The squelch might
need to be adjusted.
Adjust the squelch threshold.
See “To adjust the squelch” on
page 17.
The antenna might
need to be adjusted.
Check the antenna connection.