BT 1000 Hands-free system for mobile phones Operating manual ALAN Electronics GmbH
General information BT 1000 The headset BT 1000 is a comfortably to wear wireless hands-free headset for mobile phones that are TM equipped with Bluetooth TM technology. This new Bluetooth TM mobile phones of any brand with Bluetooth technology gives you the opportunity to pair technology such as i. e. Nokia 6310, Ericsson T 39, T 68, TM Sony-Ericsson T 68i or Philips Fisio 820 with Bluetooth hands-free headsets.
Important advice to prepare the headset before wearing on your ear The headset is being delivered folded up. The same position is used for charging in the charging station or for storing. To wear it on your ear please turn the microphone arm (1) as indicated downwards. The earhook (2) is flexible at the end so that it can be adjusted to the 1 individual ear shape. 2 To wear it on your ear fold the earhook (3) backwards for no more than 1 or 2 cm. 4 5 3 max.
charging station allowing one hour charging time before first use. It can be useful to carry out the first charging at a 230V mains supply. Charging starts the moment the headset is being placed in the charging station. 1.5 to 2.5 hours are being needed to fully charge a completely empty BT 1000. The left indicator light gives you information of the state of charging. (red = charging, green = battery full).
then switch it on again and press all 3 keys simultaneously for about 3 seconds. Now you can hear a short melody for confirmation. Release the keys. Finally, switch the headset 1 x off and on again with the slide TM switch. Your Bluetooth headset is ready for pairing with your mobile phone. On the mobile phone’s side You start the pairing procedure as described in the user manual of Your phone. Within the setup menu Your phone will search for active Bluetooth TM devices in Your communication range.
phone’s headset to another device with Bluetooth TM technology like the audio gateway BT 2000 set. Starting Reset • (1) Switch Your headset OFF with power switch (slide switch). • (2) Switch Headset ON again • (3) Press all 3 keys at headset together and keep them pressed for about 3 seconds. Hold headset during that procesure near to Your ears. You will hear s short melody marking a successful reset.
Technical Data Wireless transmission system Spread-Spectrum Bluetooth TM Standard 1.1, Class 2 Frequency range 2402 to 2480 MHz Channels 79 with 1 Mhz bandwidth per channel Radiated transmission power (ERP) max. + 4 dBm (2.5 mW), with automatic power control Modulation digital encryption, FHSS, GMSK, 1 Mbit/s Channel occupancy system frequency hopping 625 µs time slot Maximum communication distance approx. 10 m Operating time switched on (StandBy) more than 72 hours talk time more than appr.
Important information for perfect fit of the Bluetooth™ headset BT 1000/2000! Please note the following advice and you will be enthusiastic about the comfortable fit of this headset. 1. Fold back the earhook until it locks, then place the headset on your right outer ear. 1. Important! Please follow advice no. 2! 2. Adjust the the flexible end of the earhook by pushing/bending until it 2. sits tightly.
