Operation Manual

alarm times are displayed on the screen.
• If you have configured a network connection, and use the DR400
again with the network in reach, the DR400 will automatically
re-establish the connection. In case you desire to change the network,
enter configuration to setup the corresponding connection.
• In the letters or numbers input screen, rotate the reel to choose letter.
Once you are on the letter you want, press 2
22
2 to move to the next
entry. When you are at the end of the input, press Select to confirm.
In case you want to correct something press 1
11
1 to move to a previous
entry.
• The 3.5mm LINE OUT connector is for the connection to any speaker
system with a 3.5mm audio cable.