Operation Manual

28 English
Battery Charging
To
charge your radio, carefully follow these instructions:
1.) Connect the power adaptor to the mains power supply and
connect the adaptor charger jack to the charging cradle.
2.) Disconnect any radio accessories and ensure the radio is
switched off.
3.)
Insert the radio into the charging cradle until it 'Clicks' home. The
charger LED will glow red and charging will start.
If the charger LED
blinks red or green or t
he charger LED does not light,
re-insert the
radio into the charging
cradle.
4.)
The battery charging time is about 4~5 hours. When the battery is
fully charged the green LED (Full) will be turned on.
Tectalk Duro
charging slot battery
charging slot radio
battery
radio
Power Adaptor
- Input: 230VAC
- Output: 12VDC 1Ah