Operation Manual

Radio ID Editing

An up to 3 digit Radio ID can be programmed when the radio is switched on.

You can customise this Radio ID to identify your radio.

To enter the Radio ID edit mode, switch on the radio whilst pressing the

SCAN button and the MODE button.

1. Press the MODE button to select the first position.

2. Use the UP or DOWN button to change the character.

3. Press the MODE button to select the next letter.

4. Repeat steps 2 and 3 until the ID is complete.

5. Turn off the radio to finish the editing.

Function Mode – User Mode

The user mode allows you to set-up and edit the basic functions (see Radio

Features Explained).

To access the consumer mode, press the MODE button briefly.

Each press of the MODE button steps the radio sequentially through the

different functions. The radio display indicates the current function. The

present setting and associated icon flash.

Use the UP or DOWN button to change the setting. Press the PTT or MODE

button or wait for 5 seconds to store your choice. If your do not press any

key for 5 seconds your radio will return to standby mode automatically.

NB. Squelch level adjustment works via the SQUELCH button.

Display Function Settings

Change Privacy Tone Code 1 to 50, off

Change Digital Privacy Tone Code

(CTCSS)

1 to 104, off

Select Hands Free Mode (VOX) 1 to 5, off

Select Dual Watch Mode 1 to 8, off

Activate Roger Beep on, off

Activate Key Beep on, off

Change Call Alert Tone 1 to 5, off

Change Squelch Level 1 to 15, Auto, off