Operation Manual

Function Mode – Advanced Mode

The advanced mode allows you to program user preferences, activate

features and use advanced functions (see Radio Features Explained).

To access the advanced mode, turn on the radio whilst pressing and

holding the SQUELCH button and SCAN button.

Each press of the MODE button steps the radio sequentially though the

different functions. The radio display indicates the current function. The

present setting and associated icon flash.

Use the UP or DOWN button to change the setting. Press the PTT or MODE

button or wait for 5 seconds to store your choice. If you do not press any key

for 5 seconds your radio will return to standby mode automatically. If the

radio is turned off and turn on again without pressing any buttons, the radio

will return to the user mode.

Display Function Settings

Change Privacy Tone Code

(CTCSS)

1 to 50, Off

Change Digital Privacy Tone

Code (DCS)

1 to 104, Off

Select Scan Stay Timer

1,2,3,5,10,15,20,30,

45,60, Off

Select (VOX) 1 to 5, Off

Select Busy Channel Lock out

Mode (Main Channel)

Carrier, CT, DT, Off

Select Priority Channel 1 to 8

Select Priority Scan Time 1 to 5, Off

Select Dual Watch Mode 1 to 8, Off

Activate Roger Beep On, Off

Activate Key Beep On, Off

Time-Out-Timer Settings

15,30,45,60,90,120,

180,240, Off

Change Call Alert Tone 1 to 5, Off

Clone Parameters Send, Receive, Off

Change Squelch Level 1 to 15, Auto, Off