Operation Manual

19
• To stop scanning, press the SCAN button again or press the MODE
button to step to the next menu setting.
To increase battery life use the scan modes only when really necessary.
Battery Level
The Battery icon indicates when the battery level is low and the battery
needs recharging. If necessary, refer to the instructions to recharge the
battery.
Power Save
To conserve battery power the radio will automatically enter Power Save
mode after a short period of inactivity. There is no user setting for Power
Save.
Key Lock
To toggle the key lock, press and hold the KEYPAD LOCK button. The key
lock icon appears when the lock is activated.
Troubleshooting
If you experience problems with your Tectalk Pro XL , first check the battery
power level as low batteries can cause problems such as poor transmission,
weak reception and reduced sound quality.
Then check the manual and radio display to ensure that a function (such as
VOX or Lock) has not been activated by accident.
If these steps do not solve the problem reset your unit as follows:
This will reset the radio to the factory settings and should resolve most
problems.
• Switch the radio off.
• Keep MODE- and PTT-button pressed and
• Switch the radio on with above mentioned buttons pressed
• Release all buttons
If You should still have a problem, please have a look to the service hints or
frequently asked questions (FAQ) before You send Your PMR radio back to
the service centre.