Operation Manual

7
Advanced Mode
As per above, but with additional functions: hold MON- +SCAN - buttons
and simultaneously turn on the radio.
Display Functions Setting
Change CTCSS-tone 1 to 50, Off
Change DCS-tone 1 to 104, Off
Set Scan Pause Timer 1, 2, 3, 5, 10,15, 20, 30,
45, 60, Off
Set voice control (VOX) 1 to 5, Off
Set Busy Channel Lockout Carrier,CT, DT,Off
Set Priority Channel 1 to 8
Set Priority Scan Time 1 to 5, Off
Set Dual Watch mode 1 to 8, Off
Activate Roger Beep On, Off
Activate Key Beep On, Off
Set Time-Out-Timer 15, 30, 45, 60, 90, 120,
180, 240, Off
Change Call Alert tone 1 to 5, Off
Set Clone parameters Send, Receive, Off
Change Squelch Level 1 to 15, Auto, Off
Change output power
Shortly press PTT + simultaneously UP or DOWN to change output power to HI (high) or LO
(low).
Busy Lock Out (BL) mode (lock channel when busy)
(only in advance mode) BL-Modus avoids transmission when a signal is received. Besides
oFF you can set:
a. Carrier only (CA) (regardless of the subtone)
Transmission is blocked as long as a signal is received on the same channel, regardless of
the subtone used.