Use and Care Manual

40402 & 40403 Assembly Instructions
Page 11
OPTIONAL SIPHON GUN/FOOT PEDAL ASSEMBLY
INSTRUCTIONS
Below is the component breakdown for siphon gun/foot pedal.
Part No.
Description
11595
Siphon gun pressure hose (6’)
11596
Foot pedal pressure hose (8’)
11594
Foot pedal assembly
11632
Foot pedal valve
11606
1/4” pipe coupling (air pressure inlet)
10188
1/2” washer (pressure hose to pipe coupling washer)
11579
Siphon tube (pickup tube)
11597
Siphon hose (5/8” ID) – 4’
NOTE: See separate sheet for siphon gun parts breakdown.
1. Put end of 6’ pressure hose through 1/2” washer and insert
through air inlet hole from inside of cabinet. Install 1/4” pipe
coupler to end of pressure hose from outside of cabinet and
tighten.
2. Install siphon gun to opposite end of 6’ pressure hose and
tighten securely.
3. Shop air installs to 1/4” pipe coupling.
4. If installing foot pedal option, install 8’ pressure hose to pipe
coupling from outside and install other end of pressure hose
to foot pedal valve marked “OUT”. Shop air installs to foot
pedal valve marked “IN”. Foot pedal valve fitting marked
“EXHAUST” must be kept open at all times.
5. Install siphon hose to siphon gun and opposite end to siphon
tube at right front of cabinet. Opposite end of siphon tube