Use and Care Manual
— 26 —
INSTALLATION
Installation Tips
Night Vision
• Before you install the system, plan where and how it will be positioned, and where you will
route the cable that connects the camera to the power adaptor(s).
• Avoid having a direct light source in view of the camera.
• Before starting permanent installation, have another person check the camera image
on the tablet/phone when camera is positioned in the same place it will be permanently
installed.
• If the signal will have to pass through a wall, placing the Wi-Fi router or camera next to a
window will improve the signal strength, or utilize the built-in repeater in the Power Switch
(see page 45).
• Do not install the camera pointing out of a window. The night-time picture will be unusable
due to reection from the night vision LEDs.
• As dust, grime, and cobwebs accumulate on the camera glass, they can reect light from
the infrared LED and might reduce video quality. Periodically clean the lens glass with a
soft cloth.
The camera has built-in infrared LEDs to allow you to view at night for 24-hour surveillance. The
LEDs will automatically activate at night and the picture viewed will change to black and white.
The night viewing range is up to 15 feet.
WARNING:
It is not recommended to use this camera outdoors.