Use and Care Manual

Front cover
BACK cover
FO LD
FO LD
FO LD
Wireless Made Simple.
Infrared
LED
Thumb screw
Camera
Bracket T-Bolt
Indoor/Outdoor camera
with multi-position bracket
AC power adapter
microUSB / RJ45 cable
(for optional manual
connection)
Screw/Anchor Kit
Quick Start Guide
IN THE BOX
Phillips head screwdriver or drill
may be required for installation
Let’s Get Started
LIVE VIEWING
DEVICE SETUP
For detailed installation and setup, please refer to the
Model AWF61 complete User’s Guide available on our website:
www.ALCWireless.com/support
SCAN
TO VIEW
COMPLETE
USER’S GUIDE
ALCWireless.com
Wireless
Made Simple.
Quick
Simple
Set Up
SNAP SHOT
LIVE VIEW
1
Tap preview PICTURE
Tools
Antenna
Power Indicator
Signal Indicator
microSD Card Slot*
microUSB port
Microphone
Tip: Plan the location of
your cameras for optimal
viewing and proximity to AC
Power outlets, (1) power
extension cable is included.
Indoor/Outdoor Camera
Multi-position
Camera Bracket
Passive
Infrared Sensor
Light Sensor
NOTE: Avoid installing in a location which requires the wireless signal to pass through
cement, concrete, brick and metal structures. This will reduce the transmission range.
microSD card (not included). It is
required for recording videos.
Tap to turn volume ON/OFF
in the in Live View mode.
Tap to RETURN to the
main page.
LIVE VIEW
RECORDING on
microSD CARD*
Tap for SNAPSHOT of live images
in Live View. Images automatically
save to smartphone’s camera roll
or gallery.
Tap to RECORD. One-minute
recordings save to microSD card
slot on the rear of camera, see
diagram page for location
(microSD card not included) as
well as your cloud setting (if
activated).
NOTE: Do not submerge camera in water. STRANGULATION HAZARD: Infants have STRANGLED in power cords.
Keep power cords more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce
the risk of fire, electric shock and injury to persons. Illustrations are for reference only. Actual product specifications may vary.
For additional precautions and product information, please see owner’s manual at www.ALCWireless.com/support
1
2
Manually RECORD video from Live
View by tapping Record icon.
Recording will stop after 1 minute.
Lift cover and insert a microSD card
into the rear of camera. A Class 10
microSD card is required. This camera
supports up to 128GB microSD card.
ADVANCED FEATURES SETTINGS
microSD Card Slot*
*microSD card (not included). It is
required for recording videos.
Power Cable
1080p Indoor/
Outdoor Wi-Fi
Camera
Remote Monitoring Anytime from Anywhere
QUICK START GUIDE
Model AWF61
REMOTE VIEWING
Power extension
cable
Antenna
Model AWF61
SightHD
1
2
From your smart device, DOWNLOAD and INSTALL the free ALC SightHD App.
Plug camera into an electrical outlet (allow the camera up
to 90 seconds to boot up).
3
On your device, open the Settings App. Tap Wi-Fi and under
Choose A Network, select the HD-XXXXXX Network (X
represents the numbers located on the DID barcode sticker
on the back of your camera).
FREE APP DOWNLOAD
4
If asked for a password, enter,
“12345678”. Tap Join/Connect.
5
Now Launch the ALC SightHD App and the Setup Wizard
will appear.
6
Tap to start the Wizard and select WiFi Cameras.
7
iOS Only: Once the screen indicates the camera is connected, tap
Live View.
iOS Only: Once the camera is found, the screen will show a Live View
briefly before moving to a setup screen.
8
9
At the next screen enter a new
password/security code and remember it or
write it down. Tap Wi-Fi Setting or OK.
10
Select your home network from the menu,
and then enter your home network’s
Wireless Password. Tap OK.
12
The system will reboot the camera. The reboot will be complete
when the App finishes counting down from 90. Tap still image for
live video.
11
Android Only: Tap Live View.
NOTE: Screen shots and icons may vary due to continuous updates to App and software development.
Camera 2 (Live Video)
1
Select the Start and Stop date and time on the Select Event Filter and tap OK.
2
3
Tap the FILE that you want to playback from the list.
PLAYBACK
Tap EDIT SETTING icon and then EVENT LIST icon.
• Sensitivity Setting
(Motion Recording)
• Email Setting
• SDCard Setting
On the Home Page (not Live View) Tap EDIT SETTING at the
bottom of the screen, then tap SETTINGS icon and then tap
ADVANCE (the default password is 123456) to see the
Advanced Feature options:
• Recording Setting
• Time Zone Setting
(ensure your time is correct)
• Video Quality Setting
If setup did not work, reset the camera by inserting a paper clip or similar object into the Reset hole for 10 seconds
and the system will start the reset process. The system will restore to factory default settings and you may start the
Wi-Fi setup. Remove the partially installed setup by tapping EDIT SETTING on the bottom of the home screen, then
tap the Delete icon, then tap Yes. Now you can repeat the installation.
FACTORY DEFAULT/RESET
Surface Mount
CAMERA MOUNTING
NOTE: Cameras are IP66 rated for indoor/outdoor use. For outdoor use it is recommended to install
camera under shelter to protect from direct exposure to sunlight and other environmental elements. Avoid
pointing a camera directly at any bushes or tree branches or objects that may naturally move due to winds.
Recommendations for best system performance:
• iOS 6.0 or above.
• Android: Android
smartphone or tablet (version 2.3x or above).
• Storage: Class 10 microSD memory card (up to 128 GB).
• Bandwidth: 512Kbps or above upload/download speed suggested.
CAMERA INSTALLATION + SETUP
1 2
43
Secure the multi-position
camera bracket to a stable
surface, ceiling or wall.
Loosen the T-Bolt on the camera
bracket and adjust viewing angle
using the Thumb Screw to rotate
position.
Align hole on bottom of camera
with T-Bolt to install camera.
Screw antenna into rear of camera.
Plug into electrical outlet when
ready to install App (Step 2 in
REMOTE VIEWING section).
TM
CLOUD: When an SD card is inserted and the Cloud option is activated (in Advanced
Settings), recorded videos will automatically be transferred onto the cloud, i.e. Google Drive.