User's Manual

3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 75/346
104
Figure 41 – Inserting the conductors into the management bar
Table 25 RS-422 cable pin and signal assignments
10. Slide the management bar towards the cable jacket until there is no more than 4 mm (0.15 in.)
between the bar and the jacket; see Figure 42.
Pin
Signal
RJ45 connector LEMO connector
13Tx-
21Tx+
72Rx+
84Rx-
Note - The cable may not work properly if the distance between the management bar and
the cable jacket is greater than 4 mm (0.15 in.).
Management
bar
Pin 2
Tx+ (W[Blu])
Pin 1
Tx- Blu
Pin 8
Rx- (W[O]
Pin 7
Rx+ (O)